Filter
Top Products
MULTI-ROOM SYSTEM CONTROLLER RMZ-955
28
RKP-901 Keypad
VOLUME
TUNER
VIDEO
DISC
OFF
CD
AUX
*
MUTE
The RKP-901 keypad offers easy access to most RMZ-955 system
functions. The major functional difference between the RKP-901
keypad and RR-952 hand held remote controller is that the wall-
mounted keypad has only twelve keys.
Input Select commands
These buttons provide “one-touch” operation. If the system is cur-
rently inactive, pushing any of the four input source selection but-
tons will “power up” the RMZ-955’s and the source components,
send the play command to the selected source, and send the sig-
nal from that source to the zone from which the button is pushed.
Assuming the tuner is tuned to a station, a disc in the CD player,
etc., you will hear music with the push of a single button.
The function of the button changes slightly if the system is already
active. For example, if the source selected is already playing in
another zone, pushing the Input Select button will not send a Play
command, but will simply let you hear what is already playing. If
your zone is already active, pressing an Input Select button lets
you hear a different source, sending a Play command if neces-
sary. Finally, the Input Select button can be used as a Play button
to resume operation following a previous Pause command.
The details are not important. If you want to hear a source in your
room, just press the Input Select button for that source and the
system will worry about the details for you.
TUNER: Selects the tuner as the active source.
CD: Selects the CD player as the active source and sends the play
command to begin operation, if necessary.
AUX: Selects the source component connected to Input 3 (tape
deck, or satellite TV) as the active source and sends the play
command to begin operation, if necessary.
VIDEO: Selects the video component (VCR, CD2, or DVD) as the
active source and sends the play command, if necessary.
System commands
– VOLUME + : Press to decrease or increase volume.
MUTE: Temporarily reduces system volume to almost full attenua-
tion. Restore preselected volume levels by pressing MUTE again,
VOL+, VOL– or any input selector.
OFF: A brief push puts the Zone from which the command is sent
in Standby status. All other zones are unaffected. A continuous
push of more than 4 seconds will send a stop command to all
source components and power down the entire system.
Source Control Commands
and
: These buttons are “up” and “down” controls for operat-
ing source components. Their function varies depending on the
type of source currently active. See chart below.
DISC: This advances a multi-disc CD player to the next available
disc. This button has no function for other components.
*
: This button is a multi-purpose control, depending on the cur-
rently active source component. For most source components, it
will send the STOP command to the source. However, it may also
be used for a special function on some components. See chart.
DISC
Next Disc
No function
No function
No function
No function
No function
No function
No function
CD PLAYER
TUNER
VIDEO (LD)
VIDEO (CD2)
VIDEO (VCR)
VIDEO (DVD)
AUX (TAPE)
AUX (SAT)
Track skip (back)
Preset –
Chapter Skip (back)
Track Skip (back)
F. Rewind/Scan
Skip Back
Rewind
Channel (down)
Track skip (forward)
Preset –
Chapter Skip (forward)
Track Skip (forward)
F. Forward/Scan
Skip Forward
Fast Forward
Channel (up)
Random/Shuffle Play
Favorite Station
Stop
Random/Shuffle Play
Stop
Stop
Stop
No function
*