Filter
Top Products
7
Panel Descriptions
Rear Panel
fig.00-02
10.
Cord Hook
Anchor the AC adaptor power cord here to prevent the
adaptor from being disconnected accidentally.
fig.00-03
* To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the
power cord using the cord hook, as shown in the illustration.
11.
AC Adaptor jack
The AC adaptor is connected here.
Never use any AC adaptor other than the one provided.
Connecting any other adaptor may result in damage to
the equipment.
12.
GUITAR/BASS switch
Switch this according to the instrument you are using.
Switch to GUITAR if you are using a guitar; if using a
bass, switch this to BASS.
* Note that the GI-20 may not operate properly if this setting is
not correct.
13.
FOOT SW jack
Connect an optional foot switch (such as the BOSS FS-
5U) here.
14.
EXP PDL (expression pedal) jack
Connect an optional expression pedal (such as the EV-5)
here.
15.
GUITAR OUT jack
This outputs the sound from the guitar or bass’s normal
pickup.
Connect this to a guitar amp or bass amp, or to an effects
processor.
16.
MIDI connector (IN/OUT)
This connector is used to connect an external MIDI
device, allowing MIDI data to be transmitted and
received.
17.
USB connector
This connector is for connecting to a computer using a
USB cable.
No USB cable is included with the GI-20. You will need to
purchase a third-party USB cable separately.
10 11 12 13 14 15 16 17