Filter
Top Products
46
Installing & Setting Up the Driver (Windows)
Driver Installation
■ Windows XP users
1.
With the GI-20 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2.
Open the “System Properties” dialog box.
1) Click the Windows “Start” menu, and from the menu, select “Control Panel.”
2) In “Pick a category”, click “Performance and Maintenance”.
3) In “or pick a Control Panel icon”, click the “System” icon.
3.
Click the [Hardware] tab, and then click [Driver Signing].
Open the Driver Signing Options dialog box.
fig.d02
4.
Make sure that “What action do you want Windows to take?” is set to [Ignore].
fig.d03
If it is set to “Ignore”, simply click [OK]. If it is not set to “Ignore”, make a note of the current setting
(“Warn” or “Block”). Then change the setting to “Ignore” and click [OK].
The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you use.
• Windows XP users ......................... (p. 46)
• Windows 2000 users...................... (p. 51)
• Windows Me/98 users ................... (p. 55)
If you are using Windows XP
Professional, you must log on
using a user name with an
administrative account type
(e.g., Administrator). For
details on user accounts, please
consult the system
administrator of your
computer.
Depending on how your
system is set up, the System
icon may be displayed directly
in the Control Panel (the
Classic display). In this case,
double-click the System icon.
If you changed “What action
do you want Windows to
take?” in step 4, you must
restore the previous setting
after you have installed the
driver.
→ If you changed “What
action do you want Windows
to take?” (p. 50)