Filter
Top Products
C2900M-B (1/03) 99
CONNECTING A PELCONET TRANSMITTER TO THE CM6800 ASCII PORT
Refer to Figure 49. This configuration lets an operator view and control cameras with a PC using a
web browser. (The operator’s PC is not shown on the diagram.) All settings are done in the CM6800
manager program or through a CM6800 menu. Note the following:
• Port 2 defaults to ASCII and RS-232.
• Ports 7 and 8 can be set to ASCII and RS-232 by using the CM6800 manager program (refer to
Figure 50) or by using a CM6800 menu (refer to Figure 51).
Pelco recommends using Port 2.