Filter
Top Products
C2900M-B (1/03) 77
TROUBLESHOOTING CONNECTION PROBLEMS
If you fail to connect to a system from a hardware receiver, check the following to pinpoint the
problem:
• Do not connect two units of the same type (for example, receiver to receiver).
• Make sure network connectivity is available (for example, by using the ping command as
described above).
TROUBLESHOOTING THE VIDEO CONNECTION
If no video or a distorted video image is displayed at the receiver during a connection to a
transmitter:
• Make sure to use the right unit for your application: a camera can be connected only to a
transmitter, never to a receiver.
• Make sure the camera is switched on and the coaxial cable is connected to the transmitter.
• Check the camera cable and connect a video monitor to the camera to check that the camera is
functioning correctly.
• At the receiving system, make sure the monitor is switched on and the coaxial cable is
connected to the receiver.
• Check the monitor cable and the selection of the monitor channel, if the monitor features more
than one video channel.
• If the monitor can display only a single video standard (PAL or NTSC), check the setting of the
video output format on the Video Settings configuration page.