Filter
Top Products
88 C2900M-B (1/03)
ᕡ Connect a PV130 Converter to the RS-232 port on the front of the NET101R/R-A receiver. The
data format must be 9600 baud, 8 data bits, odd parity, and 1 stop bit.
ᕢ Connect the black and white striped wire from the power supply that comes with the converter
to the converter’s +12 VDC terminal and the solid black wire to the GND terminal.
ᕣ Connect TD(A) on the converter to terminal 7 on the wall block. Connect TD(B) on the converter
to terminal 8 on the wall block. Connect RD(A) on the converter to terminal 2 on the wall block.
Connect RD(B) on the converter to terminal 1 on the wall block.
ᕤ Connect a 12 VAC power supply to terminals 3 and 4 on the wall block.
ᕥ Connect the wall block to the KBD4000 with an RJ-45 straight cable.
ᕦ Connect the monitor.
ᕧ Refer to Figures 38 and 40. Splice the supplied DB9 cable into the multiplexer wall block.
Connect TX- from the NET104A to terminal 2 on the wall block, TX+ to terminal 1, RX- to
terminal 7, and RX+ to terminal 8.
ᕨ Plug the supplied DB9 cable into the COM port on the transmitter. The data format must be
9600, 8, odd, 1.
ᕩ Connect the wall block to COM IN on the multiplexer with an RJ-45 straight cable.
ᕫᕾ Connect MAIN video output from the multiplexer to the transmitter.