Onkyo TX-NR636 Stereo Receiver User Manual


 
Troubleshooting
57
fire alarm, automatic door, and other automatic control
device.
When using a pace maker or other medical electronic
• devices, confirm with the medical electronic device
• maker or dealer for the effect of the radio wave.
The AV receiver contains a microPC for signal processing
and control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet,
wait at least 5 seconds, and then plug it back in.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit’s
malfunction.
Before you record important data, make sure that the
material will be recorded correctly.
Before disconnecting the power cord from the wall outlet,
set the AV receiver to standby.
Regarding the Video Resolution
The following shows how video signals at different
resolutions are output by the unit.
Describes as follows as "Input: Output".
HDMI: HDMI
4K (
2): 4K (
1/
3/
4)
1080p/24: 4K (
1), 1080p/24 (
3)
1080p: 4K (
1), 1080p (
3)
1080i: 4K (
1), 1080p, 1080i (
3), 720p
720p: 4K (
1), 1080p, 1080i, 720p (
3)
480p/576p: 4K (
1), 1080p, 1080i, 720p, 480p/576p (
3)
480i/576i: 4K (
1), 1080p, 1080i, 720p, 480p/576p,
480i/576i (
3)
Component: HDMI
480i/576i: 4K (
1), 1080p, 1080i, 720p, 480p/576p,
480i/576i (
3)
Composite: HDMI
480i/576i: 4K (
1), 1080p, 1080i, 720p, 480p/576p,
480i/576i (
3)
HDMI: Component
Can not be output.
Component: Component
1080p: 1080p
1080i: 1080i
720p: 720p
480p/576p: 480p/576p
480i/576i: 480i/576i
Composite: Composite
480i/576i: 480i/576i
1 Supported resolutions: [3840 × 2160 30 Hz], [3840 × 2160 25 Hz],
[3840 × 2160 24 Hz], [4096 × 2160 24 Hz]
2 The unit is compatible with HDMI IN 1 to HDMI IN 4. However, the
number of the player that outputs video signal at 4K resolution or the
same level at the same time may be up to three.
3 Supported resolutions for HDMI OUT SUB.
4 Supportedresolutions:[3840×216060Hz],[4096×216060Hz],
[3840 × 2160 50 Hz] and [4096 × 2160 50 Hz] in YCbCr4:2:0
compliant with HDMI2.0