Filter
Top Products
Advanced Settings
34
HDMI
Setting item Default Value Setting Details
HDMI CEC (RIHD) Off Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
• Depending on the TV set, a link may need to
be configured on the TV.
• This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
• Setting to "On" and closing the on-screen
menu displays the name of the CEC-
compatible components and "RIHD On" on
the display.
• Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
• If you operate the MASTER VOLUME control
of the unit when this setting is set to "On"
and you are listening to the audio through the
speakers of your TV, audio will be output also
from the speakers connected to the unit. If
you want to output from only either of them,
change the unit or TV settings, or reduce the
volume of the unit.
• If abnormal operation occurs when you set
the setting to "On", set it to "Off".
• When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
• When changing this setting, turn off and
then on again the power of all connected
components.
Setting item Default Value Setting Details
HDMI Through Off You can display the video of an HDMI connected
player on the TV even if the unit is in standby
mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in
"HDMI Input". It cannot be set to any other input
selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device
connected to any jack will not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD", "PHONO": Video of the
device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the
HDMI IN jack assigned to the input selector that
was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the
HDMI IN jacks will be output to the TV.
"Eco": Video of all the devices connected to the
HDMI IN jacks will be output to the TV. If you
select this setting when using a CEC-compatible
TV, you can reduce the power consumption in
standby mode. It cannot be selected if "HDMI
CEC (RIHD)" is set to "Off".
• When "HDMI Through" is enabled, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
• When changing the setting, turn off and
then on again the power of all connected
components.