Filter
Top Products
35
For each preset station, you can enter a name consisting of up to eight
alphanumeric characters. This is useful because you can easily note
which station you are listening to by the station name on the display.
If a preset station is not given a name, it will be indicated by its tuned-
in frequency.
Entering characters
1. Recall a desired preset station.
Refer to "Recalling a preset station" on page 34.
2. Press the CHARACTER button.
The frequency indication disappears and the cursor ( _ ) flashes.
Note:
You will be taken out of the mode (the frequency indication will
reappear) if you do not rotate the SMART SCAN CONTROLLER
within 16 seconds.
3. Rotate the SMART SCAN CONTROLLER clockwise or
counterclockwise until the first character of the name you wish
to enter appears on the display.
4. Press the ENTER button to enter the first character.
The cursor moves to the next position.
To cancel the last character entered...
Press the AUTO TUN button. The character at the cursor position,
or to the left of the cursor (if no character is shown at the cursor
position), is erased. You can erase the characters continuously by
pressing the AUTO TUN button repeatedly.
5. Repeat steps 3 and 4 for the second and later characters.
6. Press the CHARACTER button once again to store the entered
characters.
Note for European models:
If you attempt to enter characters for an FM station broadcasting
RDS information, "RDS...PS" is displayed and characters cannot
be entered.
Switching between the frequency and name indication
Press the DISPLAY button.
Each time you press this button, the frequency and the name appear
alternately.
MASTER VOLUME
MAXMIN
TREBLE
SYSTEM
PHONES
DISPLAYPTY/TP
CHARACTER
SCAN GROUP MEMORY
FM MUTE
/
MODE
CLEAR
TI CH
INPUTMUL
VIDEO CAM INPUT/3VIDEO
VIDEO AUDIOLR
(
MONO
)
BASS
DIGITAL AUDIO
SELECTOR
S
VIDEO
STAND
-
BY
AUTO TUN
SMART SCAN CONTROLLER
ENTER
3
-
D BASS
MAIN REMOTE
SPEAKERS
PRESET
TUNING
SURROUND
PARAMETER
CDPHONOAMFM
TAPE
-
2
MONITOR
TAPE
-
1
M
D
VIDEO
-
3
CAM
VIDEO
-
2
VCR
-
2
/
TV
VIDEO
-
1
VCR
-
1
DVD
MIDNIGHT
THEATER
Re
-
EQ
MULTI SOURCE
REC OUT
AUDIO
VIDEO
CONTROL
RECEIVER
TX-DS
656
POWER
OFF
ON
3. While holding down the MEMORY button, press the FM
MUTE/MODE button to erase the station name.
The station name disappears and in 16 seconds the frequency
indication appears.
To switch to the frequency indication immediately...
Press the CHARACTER button.
Changing an entered station name
1. Tune in the station whose name you wish to change.
Refer to "Recalling a preset station" on page 34.
2. Press the CHARACTER button.
3. Press the AUTO TUN button to erase the characters that you
want to change.
4. Follow steps 3 and 4 of "Entering a station name" to enter new
characters.
5. Press the CHARACTER button to store the changes.
Note:
If the station has no name, the frequency will reappear 0.5 second after
your attempt to switch to the name indication.
Erasing a station name
1. Recall the station whose name you wish to erase.
Refer to the "Recalling a preset station" on page 34.
2. Press the CHARACTER button.
The frequency indication disappears and the cursor ( _ ) flashes.
4
SMART SCAN CONTROLLER
ENTER
3
6
CHARACTER
ENTER button
SMART SCAN
CONTROLLER jog dial
DISPLAY button
CHARACTER button
AUTO TUN button
Characters which can be entered:
A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z " & , ( ) * + , - . / = ? [ ] | 0 1 2
3 4 5 6 7 8 9
Note: indicates a space.
Entering a station name
DISPLAY
MHz
Listening to FM/AM broadcasts
2
CHARACTER