Filter
Top Products
28
Input source selection and surround setup
Using the remote controller
You can use the remote controller to select an input source and set up
the surround mode for playback .
1. Press the POWER button.
The STAND-BY indicator on the front panel goes out and the
display lights up.
Note:
If the SPEAKER MAIN indicator is not lit on the display, press the
SPEAKERS MAIN button on the unit's front panel to make it
appear on the display.
2. Select the desired input source using the SOURCE SELECTOR
buttons.
SOURCE SELECTOR Selected input source
button
DVD DVD player
VIDEO-1 Video Cassette Recorder
VIDEO-2 Video Cassette Recorder, TV
VIDEO-3 Video camera
TAPE-1 MD recorder, DAT deck, cassette tape
deck
TAPE-2 Cassette tape deck
TUNER Built-in tuner
PHONO Turntable
CD CD player
If the selected input source is connected to one of the DIGITAL
INPUT connectors of the TX-DS656...
For details, "Selecting the digital/analog audio input" on page 30.
3. Start playing the selected input source.
If you have selected "TUNER" in step 2...
Select the group and preset No. using the GROUP and PRESET
a/s buttons in the TUNER area of the remote controller,
respectively. For details, see "Tuning in a broadcasting station" on
page 32.
Note that you cannot select stations which have not been preset.
4. Adjust the sound volume using the VOLUME y or u button.
The current sound volume is shown on the front panel display while
adjustment is in progress.
If no sound is output...
Check if "TAPE-2 MONITOR" is shown on the display. If it is lit,
the TAPE-2 function is enabled and sound is not output when an
input source other than "TAPE-2" is selected. In this case, press the
TAPE-2 button to clear the "TAPE-2 MONITOR" display. For
details, see "Using the TAPE-2 MONITOR function" on page 44.
5. Press the SUR MODE button repeatedly to select the desired
surround mode.
To have stereo sound output, set the Surround Mode item to
"STEREO".
The surround mode once set will be recalled automatically every
time the same input source is selected. (The previously set surround
parameters will also be recalled.) For details, see "Selecting a
surround mode" on page 39.
MUTING
POWER
SLEEP
DVD VIDEO-1
VIDEO-2
TAPE-1 TUNER PHONO C D
SOURCE SELECTOR
DVD
DISC
PAUSE
/
STEP
TONE
TEST
MODE
SUR
VIDEO-3
M
TI-CHUL
INPUT
TAPE-2
POWER
POWER
TAPEC D
TV/
VCR
VOLUME
/
REMOTE
SPEAKER
CURSOR
ENTER
REMOTE CONTROLLER
CH SEL
SENDING/
LEARN
SUBROOM
C H
AB
LEVEL
DIMMER
LEARNED
PROGRAMMABLE AREA TV
VIDEO
/
SUBTITLE
ON
/
OFF
RC-373M
VOLUME
TUNER
PRESETGROUP
TUNER section