Filter
Top Products
4
N
Overview OMWT-SOFT-OPC Server
delete it. To edit a device click on the device to select it and click on "Edit" to edit
the device. There is also a "Stop" button. If you click that button, OMWT-SOFT-
OPC will stop listing devices in the window. When you click on the "Stop" button it
becomes a "Receive" button. If you click on that, OMWT-SOFT-OPC will start
receiving packets and listing devices again.
When you are ready, hit "OK", or "Cancel" to exit.
Edit Device
The Edit screen for a new wireless device shows the device's serial number, which
the user cannot change, the device's current Label, which can be changed by the
user, and the Transmit Rate for the device. The Label cannot be the same as the label
used by any current device. The Transmit Rate is in seconds. The default value is
60. OMWT-SOFT-OPC uses the Transmit Rate to determine if a device has gone
offline.