Filter
Top Products
OMWT-SOFT-OPC Server Overview
N
1
Overview
Quick Start
When OMWT-SOFT-OPC is run for the first time it displays this help screen. You
may view this help screen again by selecting "Help" from OMWT-SOFT-OPC's main
window.
OMWT-SOFT-OPC is designed to gather data from sensors. OMWT-SOFT-OPC
makes available the data it receives from each sensor through OPC tags.
The main OMWT-SOFT-OPC Server window will show the total number of devices
in the startup list and how many of those that are online. The offline devices will be
shown in the list box at the bottom of the window.
OMWT-SOFT-OPC can be a stand-alone data logger. When data logging is enabled,
OMWT-SOFT-OPC will store collected data in an ASCII file at a programmable
interval. See section "OMWT-SOFT-OPC Server Data Logging".
This Help and all other Help topics may be accessed from the main window by
selecting Help or pressing F1.
To Get Started:
N
Plug the reciever into your serial port
N
Start OMWT-SOFT-OPC.
N
If necessary, tell OMWT-SOFT-OPC what kind of Receiver you are
using.
N
When the "Add Wireless Device" screen appears, press the service
mode button on your transmitter to transmit a packet that OMWT-
SOFT-OPC can see.
N
When a device appears in the window, you may click to select it and
then press the 'Edit' button to change its label name and transmit time.
N
Press OK to add these sensors to the OMWT-SOFT-OPC list
N
OMWT-SOFT-OPC will create OPC tag objects for each device and
start polling and gathering data from each device.