Filter
Top Products
32
N
OMWT-SOFT-OPC Server Tags OMWT-SOFT-OPC Server
Digital I/O: DIGITAL
n
online
(R) - indicates if the device is communicating (0 or 1)
n
odaladdress
(R) – (TCP/IP Receiver). The node address starts at 1. For
TCP/IP Receivers, the node address corresponds to the node number
for the TCP/IP connection.
re
peateraddress
(R) – (Wireless mode) contains the location identifier of
the OMWT-REPEAT repeater. If the sensor did not pass through a
repeater then the value is 0.
polltime
(R/W) - how often to poll the device (in milliseconds)
serialno
(R) - registration number of the temperature sensor
inputA
(R) - level of PIOA (0 or 1)
inputB
(R) - level of PIOB (0 or 1)
counterA
(R) - counter of the activity latch of PIOA
counterB
(R) - counter of the activity latch of PIOB
counterAB
(R) - counter A minus counter B
outputA.value
(R/W) - current value of the output of PIOA (0 or 1)
outputB.value
(R/W) - current value of the output of PIOB (0 or 1)
outputA.ondemand
(R/W) - 1 - output on demand; 0 - on next poll (0 or 1)
outputB.ondemand
(R/W) - 1 - output on demand; 0 - on next poll (0 or 1)
input.descA
(R) - General identification description field for channel A.
input.descB
(R) - General identification description field for channel B.
(R) – indicates that the tag is readable.
(R/W) – indicates that the tag is both readable and writeable. OPC Write operations
will either change an I/O point at the device, or an operation will be performed.