Filter
Top Products
OMWT-SOFT-OPC Server OMWT-SOFT-OPC Server Tags
N
33
Temperature/Humidity: HUMIDITY
n
(OMWT-TEMPRH)
online
(R) - indicates if the device is communicating (0 or 1)
polltime
(R/W) - how often to poll the device (in milliseconds)
nodaladdress
(
R)
– (
TCP/IP Receiver). The node address starts at 1. For
TCP/IP Receivers, the node address corresponds to the node number
for the TCP/IP connection.
repeateraddress
(R) – (Wireless mode) contains the location identifier of
the OMWT-REPEAT repeater. If the sensor did not pass through a
repeater then the value is 0.
serialno
(R) - registration number of the temperature sensor
input.value
(R) - current value of the pressure sensor in engineering units
input.raw
(R) - current value in inches of Hg.
input.binary
(R) - current value in binary units from the pressure probe.
input.conv
(R/W) - calibration and unit conversion parameters string.
(Cal1Raw,Cal1Engr,Cal2Raw,Cal2Engr,TempCoeff,TempCalib)
input.units
(R/W) - units of the "%RH".
input.deadband
(R/W) - deadband filtering in % of engineering Units
desc
(R) - General identification description field.
tempflag
(R) - Indicates if a temperature sensor is present in probe.
(R) – indicates that the tag is readable.
(R/W) – indicates that the tag is both readable and writeable. OPC Write operations
will either change an I/O point at the device, or an operation will be performed.