Filter
Top Products
5NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
7) IR RECEIVER — Receives the IR codes from hand-held remotes during programming.
8) PROGRAM BUTTON — Enters and exits ZR-6 MultiZone Receiver IR programming and editing mode.
9) PREVIOUS AND NEXT BUTTONS — Step forward and backward through each part of the programming process.
10) TEST IR BUTTON — Transmits the last-learned IR code out of its respective IR output to verify correct operation.
11) ERASE BUTTON — Erases various parts of the ZR-6 MultiZone Receiver memory.
12) SEQUENCE INSERT (LIBRARY 1) — Inserts the stored IR commands from Library 1 into sequences to control source devices.
13) SEQUENCE INSERT (VS-6/LIBRARY 2) — Inserts pre-loaded VS-6 High Definition Video Switcher IR commands and/or
additional stored IR commands from Library 2 into sequences to control source devices.
14) ARCHIVE/UPDATE PORT — Used to connect a computer for archiving and restoring previously saved ZR-6 configurations
and or updating the firmware of the ZR-6 MultiZone Receiver and connected keypads.
15) PROGRAMMING SLIDE SWITCH — Disables the rear RS-232 connection and activates the front RS-232 connection for
archiving, setup, and firmware updates.
16) IR STATUS LED — Indicates reception of IR codes by the ZR-6 MultiZone Receiver.
SYSTEM PARTS GUIDE
ZR-6 MULTIZONE RECEIVER PROGRAMMING PANEL
(CONTINUED ON NEXT PAGE)
7
8
9
10
11
12
13
14
16
15
DS00643A-1 ZR6 Manual.indd 5 7/22/08 11:53:06 AM