Filter
Top Products
45NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
TREBLE ADJUSTMENT
A source device should be playing in the zone.
To set the Treble Adjustment:
1. Simultaneously press-and-hold the Mute key and the
Master key 3 (middle left) for five seconds. The Master
key 3 LED will start blinking.
2. Press the Vol + key to increase the treble, or the Vol –
key to decrease the treble.
3. To reset the treble to its default at setting, press-and-
hold the Play/Pause key for five seconds.
4. To save your changes and exit the configuration mode,
simultaneously press-and-hold the Mute key and the
Master key 3 for five seconds. The system will return to
the normal operating mode.
5. Repeat these steps for the remaining zone keypads.
IR SENSOR ON/OFF
By default, the IR sensor is set to the on position.
To turn the Internal IR Sensor On or Off:
1. Simultaneously press-and-hold the Mute key and the
Master key 2 (top right) for ve seconds. The Master
key 2 LED will start blinking.
2. Press the Vol + key to turn the IR sensor on. Press the
Vol – key to turn the IR sensor off.
3. To save your changes and exit the configuration mode,
simultaneously press-and-hold the Mute key and the
Master key 2 for ve seconds. The system will return to
the normal operating mode.
4. Repeat these steps for the remaining zone keypads.
VARIABLE LOUDNESS ON/OFF
By default, the variable loudness is set to the on position.
To turn the zone’s Variable Loudness On or Off:
1. Simultaneously press-and-hold the Mute key and the
Master key 1 (top left) for ve seconds. The Master
key 1 LED will start blinking.
2. Press the Vol + key to turn the variable loudness on.
Press the Vol – key to turn the variable loudness off.
3. To save your changes and exit the configuration mode,
simultaneously press-and-hold the Mute key and the
Master key 2 for ve seconds. The system will return to
the normal operating mode.
4. Repeat these steps for the remaining zone keypads.
SOLO-6 MD KEYPAD
Soft Keys
change depending
of Source
Hard Keys-
same function
regardless of Source
TECH TIP
The Solo-6 MD features a combination of hard and
soft keys. A hard key performs a single function
regardless of source device. For example, the Radio
key always selects the radio to play. Soft keys are
different. The Solo-6 MD has three soft keys located just below the
LCD screen. Except the middle key, which has the Niles logo, the soft
keys are unlabeled. The label for each soft key is in the LCD screen
directly above and it changes based on the menu or operation mode
the keypad is in.
KEYPAD SETUP
To enter the Keypad Setup mode:
1. Press-and-hold the Niles logo soft key (the middle key
below the display) for three seconds. The Setup screen
will appear.
2. Press the Vol + and
Vol – keys to scroll
through and highlight
the menu options:
“Audio Settings” and
“Display Settings.”
SYSTEM SETTINGS
SETTING UP THE ZONE KEYPADS
(CONTINUED ON NEXT PAGE)
DS00643A-1 ZR6 Manual.indd 45 7/22/08 11:58:19 AM