Filter
Top Products
92
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Operating the connected devices by remote control unit
Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.
Operating AV equipment
1
Press the input source select
button (vpage 26).
The remote control operating mode
switches as shown in the table below,
and the mode name is shown in the
remote control display.
NOTE
Press the input source select buttons once
to switch the operation mode of the remote
control unit supplied with this unit.
Press the input source select buttons twice
consecutively to switch the operation mode
of the remote control unit and input source
of this unit.
Input
source
select
buttons
Input source
of this unit
Devices controllable with the remote
control unit
(Operation mode)
z
BD
Device registered on the
BD button
z
DVD
Device registered on the
DVD button
VCR
Device registered on the
VCR button
z
SAT
Device registered on the
SAT
button
GAME
Device registered on the
GAME button
AUX1
Device registered on the
AUX1 button
NET/USB
• Network function
• iPod or USB memory device connected
to the USB port
z
TV
Device registered on the
TV button
z
CD
Device registered on the
CD button
CDR
Device registered on the
CDR button
SIRIUS SIRIUS Satellite Radio
HD Radio HD Radio receiver
M-XPort Device registered on the M-XP button
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
operation mode, press AMP to switch the remote control unit to the
amp-operation mode to perform the following operations:
• For menu operation by pressing MENU
• For setting the channel level of the unit by pressing CH LVL
• For performing direct playback
• For switching Audyssey DSX™, MultEQ XT
®
, Dynamic EQ
®
and
Dynamic Volume
®
settings.
• For using the Video Select function.
• For using the sleep timer function.
• For displaying the Source Select screen.
• For switching the M-DAX function.
• For directly selecting “AUTO” and “STEREO” of the listening
modes.
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod and HD Radio receiver, see the following
pages.
• iPod (vpage28)
• HD Radio receiver (vpage31)