Filter
Top Products
27
Simple version Advanced version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Basic version
Adjusting the master volume
Use VOLUME to adjust the volume.
n When the “Volume Display” setting
(vpage86) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vpage86) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
• The adjustable range may vary depending on input signal and
channel level settings.
You can also operate via the main unit.
In this case, perform the following
operations.
Turn VOLUME to adjust the volume.
Turning off the sound temporarily
Press MUTE.
• The sound is reduced to the level set at “Mute Level” (vpage86).
• To cancel, press MUTE again. Muting can also be canceled by
adjusting the master volume.
Set the front speakers to be used
Press SPKR A/B.
• Each time you press SPKR A/B, the front
speaker setting will change as follows.
Front A Front A+BFront B
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press ON to turn on power to the
unit.
3
Press BD or DVD twice to switch
the input source for the player
used for playback.
4
Play the component connected to this unit.
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
Playing a CD player
The following describes the procedure for playing CD player.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press ON to turn on power to the
unit.
3
Press CD twice to switch the input
source to the CD player.
4
Play the component connected to
this unit.
Important information