Filter
Top Products
108
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Surround
n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
S This indicates the selectable surround mode.
Surround mode (vpage46)
NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
LINEAR PCM
(multi ch)
LINEAR PCM
(2ch)
DTS-HD
Master
Audio
DTS-HD
High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1/5/4ch)
DOLBY
DIGITAL
(4/3ch)
DOLBY
DIGITAL
(2ch)
DTS SURROUND
DTS-HD MSTR
z5 S
DTS-HD HI RES
z5 S
DTS ES DSCRT6.1
z1z3 S
DTS ES MTRX6.1
z1z3 S
DTS SURROUND
z5 S S S
DTS 96/24
z5 S
DTS (–HD) + PLgx MOVIE z2z3 S S S S S S S
DTS (–HD) + PLgx MUSIC z1z3 S S S S S S S
DTS (–HD) + PLgz z4 S S S S S S S
DTS EXPRESS
z5 S
DTS (–HD) + NEO:6
z1z3 S S S S S S
DTS NEO:6 CINEMA
z5 S S S
DTS NEO:6 MUSIC
z5 S S S
DTS NEO:6 CINEMA A-DSX
S S S
DTS NEO:6 MUSIC A-DSX
S S S
Audyssey DSX
S S S S S S S
DOLBY SURROUND
DOLBY TrueHD
z5 S
DOLBY DIGITAL+
z5 S
DOLBY DIGITAL EX
z1z3 S S S S
DOLBY (D+) (HD) +EX
z1z3 S S
DOLBY DIGITAL
z5 S S S S
DOLBY (D) (D+) (HD) +PLgx MOVIE z2z3 S S S S S S
DOLBY (D) (D+) (HD) +PLgx MUSIC z1z3 S S S S S S
DOLBY (D) (D+) (HD) +PLgz z4 S S S S S S
DOLBY PRO LOGIC gx MOVIE z1z3 S S S
DOLBY PRO LOGIC gx MUSIC z1z3 S S S
DOLBY PRO LOGIC gx GAME z1z3 S S S
DOLBY PRO LOGIC gz z4 S S S
DOLBY PRO LOGIC g MOVIE z5 S S S
DOLBY PRO LOGIC g MUSIC z5 S S S
DOLBY PRO LOGIC g GAME z5 S S S
z1 If “Speaker Config.” – “S.Back” (vpage80) is set to “None”, this surround mode cannot be selected.
z2 If “Speaker Config.” – “S.Back” (vpage80) is set to “1spkr” or “None”, this surround mode cannot be selected.
z3 This surround mode can be selected when “Amp Assign” (vpage80) is set to “Normal”.
z4 If “Speaker Config.” – “F.Height” (vpage80) is set to “None”, this surround mode cannot be selected.
z5 The same was when “Audyssey DSX™” (vpage77) setting is set to “ON”.