Filter
Top Products
26
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage27)
n Playing a CD player (vpage27)
n Playing an iPod
®
(vpage28)
n Playing a USB memory device (vpage29)
n Tuning in radio stations (vpage31)
n Playing a network audio (vpage35)
Selecting a listening mode (Surround mode)
(vpage46)
n Selecting the input source (vpage26)
n Adjusting the master volume (vpage27)
n Turning off the sound temporarily (vpage27)
Playback (Advanced operation) (vpage57)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(BD, DVD, VCR, SAT, GAME, AUX1,
NET/USB, TV, CD, CDR, SATR, TUNE,
M-XP) twice to play back that source.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
• Select input source “PHONO” to play back music from a record
player connected to the PHONO input connector.
• Select the input source “PHONO” using one of the following
methods.
q “Source select ” menu (“Using the “Source Select” menu”
provided on the right)
w INPUT df on the remote control unit (“Operating the remote
control unit” provided on the right)
e INPUT SELECTOR knob on the main unit (“Operating the main
unit” provided on the right)
• Select input source “SIRIUS” with SATR button.
n Using the “Source Select” menu
q Press AMP and the press SOURCE SEL.
Display the “Source Select” menu.
Source Select :Flickr
Recent Source
Enter
Select
ENTER
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to five) are displayed.
e Icons for the input sources in the different categories are
displayed.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (NET/USB)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage86).
• To turn off the source selection menu without selecting an input
source, press SOURCE SEL again.
n Using the button on the remote control unit
Press INPUT df.
• When INPUT df is pressed, the input
source is switched in the order shown
below.
BD DVD VCR SAT AUX1GAME NET/USB
M-XPort SIRIUS CDR CD
TVHD Radio PHONO
n Using the knob on the main unit
Turn INPUT SELECTOR.
• Turning INPUT SELECTOR switches
the input source, as shown below.
BD DVD VCR SAT AUX1GAME NET/USB
M-XPort SIRIUS CDR CD
TVHD Radio PHONO