Filter
Top Products
7 – Entering names—Naming a track
35
ENGLISH
Naming a track
Here’s how to assign a name to a track recorded on a
CD-R/CD-RW disc.
1 While stopped, access the “TEXT EDIT?”
menu item and press the ENTER button.
The display will indicate “Text> XXX” (you can
choose Disc or a track number 01–99).
2
Press the ENTER button, and use the MULTI
JOG dial (or the SKIP buttons on the remote
control unit) to select a track number 01–99.
3
Press the ENTER button.
The character display area will show the current
track name, and name edit mode will be active
(the cursor will blink).
Note
If there currently is no name, nothing will be displayed
(the cursor will only blink).
4
Enter a name in the same way as for a disc
name, and press the MENU button on the
front panel (or the MENU button on the
remote control unit) to finalize your input.
If you’ve edited text and then attempt to remove
the disc without writing the TOC, a message of
Sure? Text! will appear. If you want to remove the
disc without writing the TOC, press the
(Open/Close) button once again while the Sure?
Text! message is shown (the text you entered will
be discarded).
2, 31