Filter
Top Products
4 – Playback—Playback modes
17
ENGLISH
2
If you want to specify only the track number,
or the track number and the minutes, enter
the desired digits and press the ENTER but-
ton on the remote control unit (or the PLAY
or PAUSE button).
If you specify only the track number
If you specify the track number (up to three digits)
and then press the ENTER button on the remote con-
trol unit (or the PLAY or PAUSE button), direct
search will be executed. The minutes and seconds
digits will all be zero.
Note
If you use this method to specify a track, you may omit
the 0 or 00 at the beginning. For example, press 2 to
select track 2, or press 1 and then 2 to select track 12,
and then press the ENTER button (or the PLAY or
PAUSE button).
If you use the ENTER button to perform direct search
while stopped or playing, playback will begin from
the location you specify. If you perform direct search
while paused, the disc will be paused at the location
you specify.
If you press the PLAY button to perform direct
search, playback will begin immediately from the
location where you moved. If you press the PAUSE
button, the disc will be paused at the location where
you moved.
Note
This operation is the same as
“Specifying a track num-
ber” (
→
p.15).
If you specify a track number and
minutes position
If you specify the track number and the starting loca-
tion in minutes (a total of six digits) and then press
the ENTER button on the remote control unit (or the
PLAY or PAUSE button), direct search will be exe-
cuted. In this case, the seconds digits will be zero.
The operation when you press each button will be the
same as when you specify only the track number.
For example to specify the location at 1 minute 00 sec-
onds into track 2, press the buttons in the following
order.
0 → 0 → 2 → 0 → 0 → 1 → ENTER button on the
remote control unit (or PLAY or PAUSE button)
Note
When using this method to specify the location, you can
omit the leading zero of the minutes. In the example
above, press the buttons in the order of 0
→
0
→
2
→
1
and then press the ENTER button (or the PLAY or
PAUSE button).
Playback modes
On the CDR632 you can use one of four different
playback modes. The following playback modes are
available.
Continue playback (default setting)
Tracks will playback consecutively as their number.
Note
Unless otherwise specified, the explanations in this man-
ual assume that playback mode is selected.
Single playback
Only one track will play, and then playback will stop.
Program playback
Tracks will play in the order you specify.
Shuffle playback
All tracks on the disc will play in a random order
regardless of the track number.
You can switch the playback mode either by using the
PLAY MODE button on the remote control unit or by
using MENU button.
Using the remote control unit buttons
1 While stopped, press the PLAY MODE but-
ton on the remote control unit repeatedly.
The mode will change each time you press the
button. The display will indicate the currently
selected playback modes as follows.
Display Playback modes
Continue Continue playback
Single Single playback
Program Program playback
Shuffle Shuffle playback
PLAY MODE button