Filter
Top Products
Back Panel
Description
See Figure 2 on page 11
22 Balanced Channel Outputs
The Audio + Vid~p Standard is equipped
with nine channel ~utputs. All nine channels
are equipped with balanced outputs via XLR
connectors as well as single-ended connec-
tors (30). The nine channel outputs are for
the center, left, right, left and right side, left
and right rear, and two subwoofer outputs
(labeled Sub1, Sub2).
The XLR pin configurations are as follows:
Pin
1" Shield (g~round)
Pin 2: Non-inverting (0,
°,)
Pin
3: InvertiNg (180
°
)
23 Analog Tape Input
The Audio + Video Standard is equipped
with one single-ended tape input.
24 Balanced Analog Inputs
The Audio + Video Standard is equipped
with one balanced input (labeled B1) via
XLR connectors.
The XLR pin configurations are as follows:
Pin 1: Shield (ground)
Pin 2: Non-inverting (0
°)
Pin
3: Inverting (180
°
)
25 Single-Ended Analog Inputs
The Audio + Video Standard is equipped
with five single-ended in puts (labeled S’1-$5)
via RCA connectors.
26 RF Inputs
The Audio + Video Standard is equipped with
an RF input for use with the Dolby Digital
(AC-3) RF output of a laser disc player.
Connections are via RCA or BNC coaxial
digital cable.
27 S-Video Inputs
The Audio + Video Standard is equipped
with four S-video inputs (labeled 1-4).
28 S-Video Outputs
The Audio + Video Standard is equipped
with three S-video outputs. The main S-video
output (labeled on screen) includes on-
screen graphics. For dubbing purposes, the
second and third S-video outputs do not
include on-screen graphics.
29 Infrared Remote Sensors
The Audio + Video Standard is equipped
with an additional infrared sensor and a male
baseband RC-5 remote input for custom
installations.
30 Single-Ended Channel Outputs
The Audio + Video Standard is equipped
with nine channel outputs. All nine channels
are equipped with single-ended outputs via
RCA connectors as well as balanced con-
nectors (22). The nine channel outputs are
for the center, left, right, left and right side,
left and right rear, and two subwoofer out-
puts (labeled Sub1, Sub2).
31 Digital Audio Outputs
The Audio + Video Standard is equipped
with two digital audio outputs in the following
formats:
One coaxial via RCA connector
One TosLink
TM
32 Tape Outputs
The Audio + Video Standard is equipped
with three analog tape outputs. Two are for
use with video sources (labeled VCR1,
VCR2), and.the third is for use with an audio
tape deck (labeled tape).
KRELL
®
Audio + Video Standard English Page 9 of 32