Filter
Top Products
Placement
WARNING
The surround preamp/processor must not
be located where it could be exposed to drip-
ping or splashin~luids.
IMPORTANT
The ventilation grids and cooling fan on the
top of the Audio + Video Standard need to
be unobstructed at all times during opera-
tion. Do not place flammable material on
top of or beneath the Audio + Video
Standard. For installations inside cabinet04,
make sure the Audio ÷ Video Standard has
adequate air circulation. Contact your dealer,
distributor or Krell
~
for further information.
Before you install the Audio + Video
Standard. into your system, review the
following guidelines to choose the opti-
mum location for placement. This will
help ensure a clean, trouble-free installa-
tion. For the dimensions of the Audio +
Video Standard, see Specifications on
back cover.
Place the Audio + Video Standard surround
preamp/processor on a firm level surface
away from dirt or moisture. A minimum spac-
ing of three inches must exist between the
Audio + Video Standard and surrounding
components to ensure proper ventilation.
AC POWER GUIDELINES
WARNING
Do not remove or bypass the ground pin
on the end of the AC cord. This may cause
RFI (radio frequency interference) to
induced into your playback system.
The Audio + Video Standard has superb reg-
ulation and does not require a dedicated AC
circuit. Avoid connections through extension
cords or multiple AC adapters. High quality,
15 ampere, grounded AC strips are accept-
able. High quality AC line conditioners or fil-
ters may be used if they are grounded.
Page 4 of 32 English KRELL
®
Audio + Video Standard