Krell Industries Audio + Video Standard Surround Preamp/Processor Stereo Amplifier User Manual


 
33 Digital Audio Inputs
The Audio + Video Standard is equipped
with five digital audio inputs in the following
formats:
Two coaxial via RCA connectors
Two TosLink
TM
One AES/EBU vixen XLR connector
34 Composite Video Inputs
The Audio + Video Standard is equipped
with four RCA composite video inputs
(labeled 1-4).
35 Composite Video Outputs
The Audio + Video Standard is equipped
with three RCA composite video outputs.
The main composite video output (labeled
on screen) includes on-screen;graphics. For
dubbing purposes, ~the second and third
composite video outputs do not include on-
screen graphics.
36 Composite Video (BNC) Input/Output
The Audio + Video Standard includes one
composite video input and one composite
video output via BNC connectors. These
ports are electrically identical to the RCA
composite video inputs (34) and, outputs
(35).
Note
You may simultaneously use both RCA and
BNC outputs, but only one of the inputs.
37 IEC Power Connector
The Audio + Video Standard is equipped
with a standard female IEC power connec-
tor.
38 Main Power Switch
Toggles the Audio + Video Standard between
off and standby.
39 12 VDC Output
Activated by the front panel power button (8),
the 12 VDC output sends a 12-volt power
on/off signal to other Krell
®
components, as
well as to other devices that incorporate a
12-volt power on/off trigger input. This allows
for remote turning on/off of other compo-
nents when the Audio + Video Standard is
dowered on.
Page 10 of 32 English KRELL
®
Audio + Video Standard