Filter
Top Products
Switching speaker output when a external
Turn CLOCK function on or off
F then 7
Turn switch on timerfunction on or off
F then 8
Turn switch off timerfunction on or off
F then 9
Activate memory channel lock out function
F then 0
Turn KEY LOCK function on or off
F then M
Turn TX STOP function on or off
F then f
2
Select transmit output power level
F then TONE
Activate duplex operation
F then DUAL
Turn reverse function on or off
F then SHIFT
Return the encoder to the original setting
F (1 second)
mode
then E.CHG
Recalling stored DTMF cords
F (1 second)
then MHz
Turn automatic power off function on or off
F (1 second)
then VFO
Turn battery saver function on or off
F (1 second)
then MR
Signaling squelch function on or off
F (1 second)
then CALL
TO DO THIS
Message memory recall
Activate paging code selection mode
Activate DTSS code selection mode
Activate frequency step selection mode
Recall lower limit frequency of programmable
band scan
Recall upper limit frequency of programmable
band scan
Change the speaker output when a external
F (1 second)
speaker is connected
then 6
Activate Time setting function
F (1 second)
then 7
Switch-on timer setting mode
Switch-off timer setting mode
Select tone frequency
PRESS
F (1 second)
then MSG
F (1 second)
then 1
F (1 second)
then 2
F (1 second)
then 3
F (1 second)
then 4
F (1 second)
then 5
F (1 second)
then 8
F (1 second)
then 9
F (1 second)
then TONE
A