Filter
Top Products
QUICK REFERENCE
Note :
The plus symbol (+) means press two keys simultaneously.
“then” means press two keys in sequence.
“(1 second)” means press the key for longer than one (1) second.
TO DO THIS PRESS
Temporarily change the volume or frequency
of the band that cannot control
E.CHG
DetermIne if a frequency is in use before
transmitting
The LCD illumination lamp lights
Change the frequency in 1 MHz step
VFO mode
Memory channel recall mode
Activate call channel function
Recall the received message
Exchange Main and Sub band contents
Activate all function (blue letters)
Memory data entering mode
Activate tone encoder
Exchange dual band reception or single band
reception
MONI
LAMP
MHz
VFO
MR
CALL
MSG
BAND
F
M
TONE
DUAL
Select desired transmitter offset direction
SHIFT
Activate Band scan
VFO (1 second)
Activate Memory channel scan
MR (1 second)
Activate CALL scan
CALL (1 second)
Select volume or encoder mode
F then E.CHG
The LCD illumination lamp lights at all times
F then LAMP
Memory shift
F then VFO
Activate VFO/Memory scan
F then MR
Activate VFO/Memory/Call scan
F then CALL
Turn message function on or off
F then MSG
Turn automatic band change function on or
F then BAND
off
Activate PAGING mode
F then 1
Activate DTSS function
F then 2
Activate CTCSS function
F then 3
Activate alert function
F then 4
IAktivate tone alert function
F then 5
TO DO THIS
PRESS
69