Filter
Top Products
5 Receiving Pages (Wait)
1
Tune to the predetermined frequency.
2
Press the F key then press the 1 key to enter the
Paging mode.
Receiving a Page with an Individual Code
1
When the proper code is received, your squelch will
open and you will hear an alert tone sequence
coming from the speaker.
2
If the calling station transmits your individual call the
display will show Paging Mode Memory Channel 0,
and will display the ID code of the calling station.
Our example uses a station calling code of 444.
3 Press the PTT switch to respond to the calling party.
Receiving a Page with a Group code
1
If the calling station transmits the group code, the
group code will display. The Paging Mode Memory
Channel on your display becomes a number other
than 0 (in this case a 5) to indicate a group call.
2 When the proper code is received, your squelch will
open and you will hear an alert tone sequence
coming from the speaker.
3 Press the PTT switch to respond to the calling party.
Note
An E indicator appears on the display if the local
station code cannot be recognized.
Note
You can communicate more efficiently if you
cancel Paging after contacting the local station.
42