Kenwood KRF-X9995D Stereo System User Manual


 
55
Specifications
Chapter Five : Specifications
KRF-X9995D (for Other Countries)
Audio Section
Rated Output Power during stereo operation
20 Hz ~ 20 kHz, 0.7% T.H.D. , 6(IEC)
.......................................................................... 150W + 150 W
130 watts per channel minimum RMS, both channels
driven, at 6 from 20Hz to 20kHz with no more than
0.05% total harmonic distortion (FTC).
Effective Output Power during stereo operation
1 kHz, 10% T.H.D. at 6 Ω.............................. 180 W + 180 W
Effective Output Power during surround operation
Front
1 kHz, 10% T.H.D. at 6 , one channel driven
.....................................................................200 W + 200 W
Center
1 kHz, 10% T.H.D. at 6 , one channel driven
.....................................................................200 W + 200 W
Surround
1 kHz, 10% T.H.D. at 6 , one channel driven
.....................................................................200 W + 200 W
Total Harmonic Distortion ............. 0.005 % (1 kHz, 75 W, 6 )
Frequency Response (IHF66)
Line (CD1, MD/TAPE, CD2/TAPE2 MONITOR, CD-R,
VIDEO 1 - 4, DVD/6CH.) ......... 7 Hz ~ 100 kHz, 0 dB, -3 dB
Signal to Noise Ratio (IHF 66)
PHONO (MM) ............................................................... 76 dB
CD1 .................................................................................. 98 dB
Input Sensitivity / Impedance
PHONO (MM) ................................................4.0 mV / 47 k
CD1 .................................................................300 mV / 47 k
DVD/6CH........................................................300 mV / 47 k
Output Level / Impedance
TAPE REC .......................................................300 mV / 2.2 k
PRE OUT (Front, Center, Surround, Surround back)
................................................................................ 1 V / 470
PRE OUT (Subwoofer)....................................... 1.8 V / 470
General
Power consumption .......................................................... 600 W
AC outlet
Switched ................................................... 2 (total 90 W max.)
Dimensions.................................................................. W : 440mm
H : 191mm
D : 416mm
Weight (Net).....................................................................20.2 kg
Tone Control
Bass ............................................................ + 7 dB (at 100 Hz)
Treble......................................................... + 7 dB (at 10 kHz)
Loudness Control
Volume at -30 dB level....... +6 dB (100 Hz), +3 dB (10 kHz)
Digital Audio Section
Sampling Frequency............. 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input Level / Impedance / Wavelength
Optical........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Output Level / Impedance / Wavelength
Optical........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Video Section
Video Inputs / Outputs
Video (composite) .............................................1 Vp-p / 75
S Video ( luminance signal) ..............................1 Vp-p / 75
(chrominance signal) .................. 0.286 Vp-p / 75
Component (luminance signal) .......................1 Vp-p / 75
(Cb/Cr-signal)............................ ±0.350 Vp-p / 75
FM Tuner Section
Tuning Frequency Range........................... 87.5 MHz ~ 108 MHz
Usable Sensitivity (Mono)
.................... 1.3 µV (75 ) / 13.2 dBf (75 kHz dev., sinad 30 dB)
50dB Quieting Sensitivity
Stereo.............................................. 25.1 µV (75 ) / 39.2 dBf
Total Harmonic Distortion (1 kHz)
Mono ................................................... 0.3 % (71.2 dBf input)
Stereo................................................... 0.5 % (71.2 dBf input)
Signal to Noise Ratio (1 kHz, 75 kHz DEV.)
Mono ................................................... 75 dB (71.2 dBf input)
Stereo....................................................70 dB (71.2 dBf input)
Stereo Separation (1 kHz) ................................................. 40 dB
Selectivity (+400 kHz) ....................................................... 50 dB
Frequency Response................30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range
9kHz step (except for Australia) .......... 531 kHz ~ 1,602 kHz
10kHz step ............................................. 530 kHz ~ 1,610 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16 µV / (500 µV/m)
Signal to Noise Ratio (30 % mod. 1 mV input) ............... 50 dB
General
Power consumption .......................................................... 600 W
AC outlet
Switched (except for Australia) .............. 2 (total 90 W max.)
Switched (for Australia).......................... 1 (total 90 W max.)
Dimensions.................................................................. W : 480mm
H : 191mm
D : 416mm
Weight (Net).....................................................................22.2 kg
Kenwood follows a policy of continuous advancements in
development. For this reason, specifications may be changed
without notice.
Full performance may not be exhibited in extremely cold
locations (below 0 deg. C).