Filter
Top Products
44
Remote Setup
Chapter Two : Setting Up PowerTouch
Moving an Item
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Move mode).
3. Touch the item you want to move. The selected item will
blink.
An item cannot be moved in a position where it is over-
lapped with another item or outside the customizable area.
4. To continue customization, touch another item then
proceed to the next operation.
Touch the
icon to exit from customization.
Cutting an Item
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Cut mode).
3. Touch the item you want to cut. The selected item will
be cut now.
The cut item can be pasted in another position by using
the Paste function.
Copying an Item
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Copy mode).
ENTER
To move upward
To move downward
To move
rightward
To move
leftward
3. Touch the item you want to copy. The selected item will
be copied into memory.
4. Paste the copied item in the desired position by using
the Paste function.
The copied item cannot be pasted in a position where it
is overlapped with another item or outside the
customizable area.
Pasting an Item
1. Cut or copy the desired item.
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Paste mode).
3. Paste the copied item in the desired position by using
the Paste function.
The copied item cannot be pasted in a position where it
is overlapped with another item or outside the
customizable area.
Deleting an Item
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Delete mode).
3. Touch the item you want to delete. The selected item
will be deleted now.
Selecting an Item in the Gallery and Pasting
it in the Screen
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon.
Press the
to view another gallery display.
3. Touch the item you want to copy. The previous menu is
displayed.
4. Touch the desired position to paste the selected item
there. The selected item cannot be pasted in a position
where it is overlapped with another item or outside the
customizable area. If the item you select is a selector
item (input selector button such as "Tuner" or "CD"), it
can be pasted only in the HOME1 or HOME2 screen.
5. If required, program the desired function in the button
by using the Learn function.
Programming a Function in a Button (Learn)
1. Touch the icon in the menu you want to customize.
(The customization cannot be initiated in screens where
the
icon is grayed out.)
2. When the customization icons are displayed, touch the
icon so that it is highlighted (Learn mode).
3. Select the item in which you want to program the desired
function. The buttons which can learn functions are not
only those displayed on the screen but also include the
Mute button, Volume up/down buttons, On/Standby
button and Joystick. However, at the menu screen of
HOME1 and HOME2, the Mute button, the Volume up/
down buttons, and the On/Standby button can not
learn any functions.
4. Aim the device’s remote at PowerTouch and press and
hold the button on the device’s remote that corresponds
to the command you want PowerTouch to learn:
This may take a few seconds; do not move PowerTouch
or the device’s remote until PowerTouch displays the
Function Change menu again.