Filter
Top Products
42
Remote Setup
Chapter Two : Setting Up PowerTouch
3. Touch .
4. Touch .
5. Confirm the station name list and touch
if it is
OK. If you do not want to finalize, touch
to return to
the previous screen.
The station name are written in the preset channel list.
Storing Stations Manually
1. Touch (HOME1) on the Quick Access menu to ac-
cess the HOME1 menu:
2. Touch on the HOME1 menu to access the Tuner
controls:
3. Touch to choose the receiving band.
4. Touch to switch between Auto tuning and Manual
tuning. Select Manual if you experience interference due
to weak radio signals.
5. Choose the station you want to store using one of the
following methods:
• Touch
or until the station’s broadcast fre-
quency appears.
• Touch
and enter the broadcast frequency
using the 10key pad. (e.g.; To select FM 87.5 MHz,
enter 8, 7, 5, 0, and
)
Touch
(check icon) to return to the TUNER control
menu.
6. Touch
.
7. Touch a storage button. Use or to access more
storage buttons.
If you choose a storage button that already has a station
assigned, the new station will replace the previously-
stored station.
8. Touch
to tune to the newly saved station and re-
turn to the Tuner controls.
9. Repeat steps 3 through 8 for each station you want to store.
Name input of the preset station.
Touch
to enter a name for the station in the TUNER
menu:
• Use the stylus to select characters from the keyboard.
• Touch to access other characters.
• Touch to insert a space.
• Touch or to move back and forth between the
characters.
• Touch (backspace) to clear the last character you en-
tered. Touch
(all clear) to delete all the characters
in the line.
• Touch to save your title.