Filter
Top Products
41
Remote Setup
Chapter Two : Setting Up PowerTouch
Your new PowerTouch provides two ways to store radio sta-
tions:
• Manual Memory, which allows you to enter and store
specific stations.
• RDS Automatic Memory ( for U.K. only), which searches
for stations broadcasting an RDS signal and automati-
cally stores them in the first available storage button.
There are 40 preset storage buttons available.
If you have a KRF-X9995D for U.K., search for and store
RDS stations first, then set stations manually. The search
function automatically assigns RDS stations to the first
storage button, overwriting any stations already stored there.
You can overwrite RDS stations with manually stored sta-
tions.
Storing RDS Stations Automatically
(for U.K. only)
1. Touch (HOME1) on the Quick Access menu to ac-
cess the HOME1 menu:
2. Touch on the HOME1 menu to access the Tuner
controls:
3. Touch to choose FM.
4. Touch .
5. Touch . The receiver locates and stores any FM sta-
tions broadcasting an RDS signal. This process can take
a few minutes to complete; please be patient. While the
receiver is searching, “AUTO MEMORY” display blinks.
RDS stations are stored in the order they are found, up to
40 stations. If the search finds fewer than 40 stations, the
receiver may automatically store other FM stations in the
open storage buttons.
If you are repeating the RDS search, any existing preset sta-
tions (whether automatically or manually stored) will be
replaced by the results of the new search.
Storing Radio Stations in Memory (optional)
Storing RDS Station Name (PS Read)
(for U.K. only)
• To execute PS Read, it is required to finish the auto
memory operation in advance.
1. Touch
(HOME1) on the Quick Access menu to ac-
cess the HOME1 menu:
2. Touch on the HOME1 menu to access the Tuner
controls: