Kenwood KRF-X9995D Stereo System User Manual


 
54
Specifications
Chapter Five : Specifications
Chapter Five: Specifications
Read this page carefully to ensure safe operation.
NOTE: Do not use contact cleaning agents because they
could cause a malfunction. Be especially careful not to use
contact cleaning agents containing oil, since they may de-
form the plastic components.
KRF-X9995D (for U.K.)
Audio Section
Rated Output Power during stereo operation
1 kHz, 0.03% T.H.D. , 6(DIN/IEC) ........... 140W + 140 W
20 Hz ~ 20 kHz, 0.03% T.H.D. , 6(IEC)
.......................................................................... 130W + 130 W
Effective Output Power during surround operation
1 kHz, 0.06% T.H.D. at 6 , all channel driven
(Front, Center, Surround) .................................. 130 W × 5
Total Harmonic Distortion ............. 0.005 % (1 kHz, 65 W, 6 )
Frequency Response (IHF66)
Line (CD1, MD/TAPE, CD2/TAPE2 MONITOR, CD-R,
VIDEO 1 - 4, DVD/6CH.) ......... 7 Hz ~ 100 kHz, 0 dB, -3 dB
Signal to Noise Ratio (IHF 66)
PHONO (MM) ............................................................... 76 dB
CD1 ..................................................................................98 dB
Input Sensitivity / Impedance
PHONO (MM) ................................................4.0 mV / 47 k
CD1 .................................................................300 mV / 47 k
DVD/6CH........................................................300 mV / 47 k
Output Level / Impedance
TAPE REC ..................................................... 300 mV / 2.2 k
PRE OUT (Front, Center, Surround, Surround back)
................................................................................ 1 V / 470
PRE OUT (Subwoofer) ................................... 1.8 V / 470
Tone Control
Bass ............................................................ + 7 dB (at 100 Hz)
Treble......................................................... + 7 dB (at 10 kHz)
Loudness Control Volume at -30 dB level
............................................. +6 dB (100 Hz), +3 dB (10 kHz)
Digital Audio Section
Sampling Frequency............. 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input Level / Impedance / Wavelength
Optical........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Output Level / Impedance / Wavelength
Optical........................ -15 dBm ~ -21 dBm, 660 nm ±30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Video Section
Video Inputs / Outputs
Video (composite) .............................................1 Vp-p / 75
S Video ( luminance signal) ..............................1 Vp-p / 75
(chrominance signal) .................. 0.286 Vp-p / 75
Component (luminance signal) .......................1 Vp-p / 75
(PB/PR-signal) ............................. ±0.350 Vp-p / 75
FM Tuner Section
Tuning Frequency Range........................... 87.5 MHz ~ 108 MHz
Usable Sensitivity (DIN at 75 )
Mono.................. 1.3 µV/ 13.2 dBf (40 kHz dev., S/N 26 dB)
Stereo................35.1 µV/ 42.1 dBf (46 kHz dev., S/N 46 dB)
Total Harmonic Distortion (DIN at 1 kHz)
Mono ................................................... 0.2 % (71.2 dBf input)
Stereo................................................... 0.8 % (71.2 dBf input)
Signal to Noise Ratio (DIN weighted, 1kHz)
Mono ............................. 65 dB (40 kHz dev., 71.2 dBf input)
Stereo............................. 60 dB (40 kHz dev., 71.2 dBf input)
Stereo Separation (DIN at 1 kHz)..................................... 36 dB
Selectivity (DIN ±300 kHz) ............................................... 64 dB
Frequency Response................30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range ...........................531 kHz ~ 1,602 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16 µV / (500 µV/m)
Signal to Noise Ratio (30 % mod., 1 mV input) .............. 50 dB
Relay and IR In/Out Section
Relay Control Terminal
Maximum Output Current ............................................20 mA
Operating Voltage.............................................................. 12 V
Output Impedance ..........................................................470
IR Receiver In Terminal
Maximum Output Current ............................................20 mA
Operating Voltage.............................................................. 12 V
Output Impedance ..........................................................470
IR Out LCD Remote Terminal
Maximum Output Current ............................................20 mA
Operating Voltage................................................................ 5 V
Output Impedance ..........................................................470
SHAPE OF PLUG TO BE CONNECTED:
IR IN/OUT SPECIFICATION:
RELAY CONTROL SPECIFICATION:
IR Receiver In
To Tip Signal Signal
To Ring Ground
To Sleeve +12V Ground
IR Out LCD
Remote
To Tip 0V 0V +12V
To Ring 0V +12V
To Sleeve Ground Ground Ground
When a specific
button on one of
PowerTouchs
screen is pressed.
Power
Off
Power
On
status
Terminal
IR Receiver In and IR Out
LCD Remote
DVD Control
Stereo mini plug Mono mini plug
Sleeve
Sleeve
Ring
Tip
Tip