Kenwood VRS-7100 Stereo System User Manual


 
63
EN
Specifications
(For Europe)
AUDIO section
Rated power output during STEREO operation ...... 100 W + 100 W
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 )
Effective power output during STEREO operation ..... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 )
Effective power output during SURROUND operation
FRONT ................................................................... 100 W + 100 W
......................... (1 kHz, 0.5% T.H.D. at 6 one channel driven)
FRONT ................................................................... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 one channel driven)
CENTER ................................................................................100 W
(1 kHz, 0.5% T.H.D. at 6 one channel driven)
CENTER ................................................................................130 W
(1 kHz, 10% T.H.D. at 6 one channel driven)
SURROUND .......................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 one channel driven)
130 W + 130 W
(1 kHz, 10% T.H.D. at 6 one channel driven)
SURROUND BACK/SUBWOOFER..................................... 100 W
(1 kHz, 0.5% T.H.D. at 6 one channel driven)
130 W
(1 kHz, 10% T.H.D. at 6 one channel driven)
Total harmonic distortion ..........................0.09% (1 kHz, 50 W, 6 )
Frequency response
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME)
...... 10 Hz ~ 44 kHz, Sampling frequency 96kHz, +0 dB ~ –3.0 dB
Signal to noise ratio
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME) ........... 96 dB
Input sensitivity / impedance
LINE (DVD, VIDEO 1, VIDEO 2, AUX, FRONT AUX, GAME)
.............................................................................. 400 mV / 47 k
Output level / impedance
REC OUT ................................................................ 400 mV / 1 k
PRE OUT (SURROUND BACK).....................................1 V / 1 k
PRE OUT (SUBWOOFER) .............................................1 V / 1 k
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE............................................................ ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...... 32 kHz, 44.1 kHz, 48 kHz,88.2 kHz, 96 kHz
Input level / impedance / wave length
Optical (VIDEO 1, AUX, GAME)
....................................... (–15 dBm ~ –24 dBm), 660 nm ±30 nm
Coaxial (DVD, VIDEO 2).......................................0.5 Vp-p / 75
VIDEO section
Input sensitivity / impedance
Composite (DVD, VIDEO 1, VIDEO 2, FRONT AUX, GAME)
...............................................................................1 Vp-p / 75
S VIDEO (DVD, VIDEO 2)
Luminance signal ................................................1 Vp-p / 75
Chrominance signal .....................................0.286 Vp-p / 75
Output level / impedance
Composite (VIDEO 1, MONITOR OUT)
...............................................................................1 Vp-p / 75
S VIDEO (MONITOR OUT)
Luminance signal ................................................1 Vp-p / 75
Chrominance signal .....................................0.286 Vp-p / 75
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (DIN at 75 )
MONO........................1.3 µV/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO ................45 µV/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO..........................................................0.2% (71.2 dBf input)
STEREO .......................................................0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO........................................................ 65 dB (71.2 dBf input)
STEREO ..................................................... 60 dB (71.2 dBf input)
Selectivity (DIN ±300 kHz).......................................................... 64 dB
Stereo separation (1 kHz)........................................................... 36 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) .........16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
.........................................................50 dB (60 dBµ V EMF input)
GENERAL
Power consumption.................................................................... 85 W
Dimensions.......................................................W: 440 mm (17-5/16")
H: 079 mm (3-1/8")
D: 364 mm (14-5/16")
Weight (Net)....................................................................4.4 kg (9.7 lb)
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).