Filter
Top Products
29
EN
Some preparatory steps are needed before starting playback.
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
POWER ON/STANDBY
or ON/STANDBY key (or the
POWER RCVR key).
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 1), OPT 1 (VIDEO 2), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used. 8
Normal playback
ON/STANDBY
POWER ON/STANDBY
POWER RCVR
Input Mode
RCV Mode
INPUT SELECTOR
VOL /
-
VOLUME CONTROL
INPUT SELECTOR
Input selector keys
Input selector keys
Listening to a source component
1
Press the INPUT SELECTOR key (or the Input selector
keys/ DVD, VID1, VID2, AUX, F.AUX, Game, TUNER) to
select the source you want to listen to.
1 Tuner (FM/AM broadcast reception)
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "FRONT AUX"
7 "AUX"
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOL +/- keys) to
adjust the volume.
*5462/20-36/EN 04.4.13, 8:01 PM29