Filter
Top Products
30
EN
Listening with headphones
PHONES
DUAL SOURCE VOLUME 5/∞
DUAL SOURCE INPUT
DUAL SOURCE ON/OFF
VOLUME CONTROL
1 Connect headphones to the PHONES jack.
2 Use the VOLUME CONTROL knob (or the VOL +/– keys)
to adjust the volume.
Playing difference sources through speakers and
headphones (DUAL SOURCE function)
While you enjoy audio listening through the speakers, another person
can enjoy another source (audio + video) through headphones by
connecting the source to the GAME or FRONT AUX jacks.
1 Connect headphones to the PHONES jack.
2 Press the DUAL SOURCE ON/OFF key to switch the DUAL
SOURCE function ON.
÷ When the DUAL SOURCE function is ON, the video and head-
phone outputs reproduce only the second input source of the
DUAL SOURCE function. Switching the DUAL SOURCE function
OFF restores the main input source signals at these outputs.
3 Press the DUAL SOURCE INPUT key to select the second
input source for the DUAL SOURCE function.
1 "GAME" :
The "GAME" input is selected as the second input source for
the DUAL SOURCE function.
2 "F. AUX" :
The "F. AUX" input is selected as the second input source for
the DUAL SOURCE function.
4 Press the DUAL SOURCE VOLUME 5 / ∞ to adjust the
headphone listening volume.
÷ When the DUAL SOURCE function is switched ON, the input
mode is fixed at "ANALOG". The listen mode cannot be
changed. 8‚
Lights up
Normal playback
Adjusting the sound
VOLUME CONTROL
VOL /
MULTI CONTROL %/fi/@/#
ENTER
ACTIVE EQ
RCV Mode
Sound
Multi %/fi/@/#
Mute
Active EQ
Enter
Adjusting the TONE
(PCM stereo and analog stereo mode only)
1 Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2 Press the Sound key.
3 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
to select "TONE", and press the ENTER (or the Enter key).
4 Use the MULTI CONTROL % / fi (or the Multi % / fi keys) to
select "TONE ON", and pressthe ENTER (or the Enter key).
TO O ENN
5 Use the MULTI CONTROL @ / # (or the Multi @ / #
keys) to select "BASS" or "TREBLE".
1 "BASS" :
Select this to adjust the low frequency range.
2 "TREBLE" :
Select this to adjust the high frequency range.
6 Use the MULTI CONTROL % / fi (or the Multi % / fi keys)
to adjust the sound quality.
TR 1ELBE)
7 Repeat steps 5 and 6 as required.
÷ The bass and treble levels are adjustable from -10 to +10 in
2 step increments.
÷ The adjustment item is displayed for approximately 20 sec-
onds.
8 Press the Sound key again to return to the input indication.
Lights up
*5462/20-36/EN 04.4.13, 8:01 PM30