Filter
Top Products
6
EN
34 5 6 7821 09
#!$ @%
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote control unit.
1 (For the U.S.A. and Canada)
POWER ON/STANDBY
key ¢
Use to turn the power ON/STANDBY.
(For Europe and Australia)
ON/STANDBY
key ¢
Use to turn the power ON/STANDBY.
STANDBY indicator
Lights when the power is in the standby
mode.
2 DUAL SOURCE VOLUME 5/∞ keys
º
Use to adjust the volume in the DUAL
SOURCE mode.
DUAL SOURCE INPUT key º
Use to select the input for the DUAL SOURCE
mode.
DUAL SOURCE ON/OFF key º
Use to switch the DUAL SOURCE mode ON/
OFF.
3 BAND key ‹
Use to select the broadcast band.
4 AUTO/MONO key ‹
Use to select the auto or manual tuning
mode.
5 Dolby D indicator ‚
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator ‚
Lights when the receiver is in the DTS mode.
Dolby H indicator ·
Lights when the Dolby H mode is ON.
DUAL SRC indicator º
Lights when the DUAL SOURCE mode is
ON.
6 Joystick
MULTI CONTROL % / fi
¡£‹
Use to control a variety of settings. Use to
tuning of radio broadcasting.
MULTI CONTROL @ / #
¡£›
Use to control a variety of settings. Use to
selection of preset radio stations.
ENTER ¡£‹
Use to control a variety of settings. Use to
presetting of radio stations.
7 MULTI CH indicator ‚
Lights during multi-channel playback.
Display
Speaker selection indicators,
Input channel indicators (The Input channel
indicators lights up to indicate the channels
contained in the input signal. The "S" indicator
lights when the surround component consists
of a single channel.)
ACTIVE EQ indicator,
DUAL SOURCE Input indicator,
96 kHz fs indicator
Frequency display,
Input display, Preset
channel display,
Listen mode display
MUTE indicator
CLIP indicator
Input mode indicators
Listen mode indicators
8 ACTIVE EQ key ⁄
Use to select ACTIVE EQ's setting.
9 VOLUME CONTROL knob ª
Use to adjust the receiver volume.
0 INPUT SELECTOR key ª
Use to select input sources.
! SETUP key ¡£¤
Use to select the speakers'settings etc.
Use to select the REC MODE.
@ LISTEN MODE key ‚
Use to select the listening mode.
# GAME jacks &¶º
$ FRONT AUX jacks &º
% PHONES jack º
Use for headphone listening.
AUTO indicator, ST. indicator,
TUNED indicator, Sleep Timer indicator,
TONE indicator
For Europe Only :
RDS indicator, PTY indicator
Dolby Headphone mode indicator,
Dolby Virtual Speaker mode indicator
View when the GAME/ FRONT AUX jack
cover is open.
Main unit
Names and functions of parts
For Europe and Australia
*5462/01-07/EN 04.4.13, 8:00 PM6