Filter
Top Products
62
EN
Specifications
(For U.S.A., Canada and Australia)
AUDIO section
For U.S.A., and Canada
Rated power output during STEREO operation
Effective power output during STEREO operation ...
130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω)
For Australia
Rated power output during STEREO operation
Rated power output during STEREO operation .. 100 W + 100 W
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω )
Effective power output during STEREO operation...
130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω)
Effective power output during SURROUND operation
FRONT ................................................................... 100 W + 100 W
......................... (1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
FRONT ................................................................... 130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND .......................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND BACK/SUBWOOFER..................................... 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
130 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
Total harmonic distortion ..........................0.09% (1 kHz, 50 W, 6 Ω)
Frequency response
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME)
...... 10 Hz ~ 44 kHz, Sampling frequency 96kHz, +0 dB ~ –3.0 dB
Signal to noise ratio
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME) ........... 96 dB
Input sensitivity / impedance
LINE (DVD, VIDEO 1, VIDEO 2, AUX, FRONT AUX, GAME)
.............................................................................. 400 mV / 47 kΩ
Output level / impedance
REC OUT ................................................................ 400 mV / 1 kΩ
PRE OUT (SURROUND BACK).....................................1 V / 1 kΩ
PRE OUT (SUBWOOFER) .............................................1 V / 1 kΩ
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE............................................................ ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...... 32 kHz, 44.1 kHz, 48 kHz,88.2 kHz, 96 kHz
Input level / impedance / wave length
Optical (VIDEO 1, AUX, GAME)
....................................... (–15 dBm ~ –24 dBm), 660 nm ±30 nm
Coaxial (DVD, VIDEO 2).......................................0.5 Vp-p / 75 Ω
VIDEO section
Input sensitivity / impedance
Composite (DVD, VIDEO 1, VIDEO 2, FRONT AUX, GAME)
..................................................................................1 Vp-p / 75 Ω
S VIDEO (DVD, VIDEO 2) (For Austrslia)
Luminance signal ................................................1 Vp-p / 75 Ω
Chrominance signal .....................................0.286 Vp-p / 75 Ω
COMPONENT VIDEO (DVD, VIDEO 2) (For U.S.A. and Canada)
Luminance signal ................................................1 Vp-p / 75 Ω
C
B/CR-signal ..................................................±0.32 Vp-p / 75 Ω
Output level / impedance
Composite (VIDEO 1, MONITOR OUT).................1 Vp-p / 75 Ω
S VIDEO (MONITOR OUT) (For Austrslia)
Luminance signal ................................................1 Vp-p / 75 Ω
Chrominance signal .....................................0.286 Vp-p / 75 Ω
COMPONENT VIDEO (MONITOR OUT) (For U.S.A. and Canada)
Luminance signal ................................................1 Vp-p / 75 Ω
C
B/CR-signal ..................................................±0.32 Vp-p / 75 Ω
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
...................1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO .............................. 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)
Total harmonic distortion (1 kHz)
MONO..........................................................0.5% (71.2 dBf input)
STEREO .......................................................0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Selectivity (±400 kHz) ................................................................. 70 dB
Stereo separation (1 kHz)........................................................... 40 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
For U.S.A., and Canada .............................. 530 kHz ~ 1,700 kHz
For Australia ................................................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) .........16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
.........................................................50 dB (60 dBµ V EMF input)
GENERAL
Power consumption.................................................................... 85 W
Dimensions.......................................................W: 440 mm (17-5/16")
H: 079 mm (3-1/8")
D: 364 mm (14-5/16")
Weight (Net)....................................................................4.4 kg (9.7 lb)
70 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
100 watts per channel minimum RMS, both channels driven,
at 6 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion.
70 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)