Filter
Top Products
32
EN
Recording
Analog sources
1 Use the INPUT SELECTOR key (or the input selector key)
to select the source (other than "VIDEO 1") you want to
record.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
3 Start playback, then start recording.
÷ Recording may not be normal for some video software. This
is due to the copy guard condition. P
Digital sources
Switch on the REC MODE to record a digital input source.
When the digital mode changes during recording in the REC MODE, the
audio signal may be interrupted momentarily.
Recording music in REC mode
When a multi-channel source such as the Dolby Digital or DTS input signal is
recorded in REC mode, the signal in the current surround mode can be recorded
down-mixed to 2-channel.
INPUT SELECTOR
SETUP
1 Use the INPUT SELECTOR key (or the Input Selector
keys) to select the source (DVD, VIDEO 2, AUX, GAME)
you want to record.
2 Put the component connected to the VIDEO 1 jacks to the
record-pause mode.
3 Press and hold the SETUP key (or Setup key) for more
than 2 seconds to select the "REC MODE".
1 REC mode off
2 "REC MODE": REC mode on
Multi-channel digital signals (DTS or Dolby
Digital) are down-mixed to 2-channel
before being output from the analog
recording (REC OUT) jacks.
INPUT SELECTOR
RMCDOEE
↓
VR2OEDI
The display switches automatically.
4 Start playback, then start recording.
*5462/20-36/EN 04.4.13, 8:01 PM32