Filter
Top Products
41
EN
Ambience effects
Switching the listen mode temporarily to the stereo mode
Press the Stereo key to switch the current listen mode temporarily to the
Stereo mode. Pressing the key again restores the original listen mode.
÷ The original listen mode is also restored when the input selector is
switched or the receiver is turned OFF then ON again.
Main example of medium:
Digital sources including DVD 96 kHz linear PCM and CD.
Analog source such as VCR or radio broadcasting.
1 "PL IIx MOVIE":
DOLBY PRO LOGIC IIx surround MOVIE mode *1
2 "PL IIx MUSIC":
DOLBY PRO LOGIC IIx surround MUSIC mode *1 *2
3 "PL IIx GAME":
DOLBY PRO LOGIC IIx surround GAME mode *1
4 "PL II MOVIE":
DOLBY PRO LOGIC II surround MOVIE mode
5 "PL II MUSIC":
DOLBY PRO LOGIC II surround MUSIC mode *2
6 "PL II GAME":
DOLBY PRO LOGIC II surround GAME mode
7 "PRO LOGIC":
DOLBY PRO LOGIC surround
8 "NEO6 CINEMA" or "NEO6 96K CINEMA":
DTS NEO:6 surround CINEMA mode
9 "NEO6 MUSIC" or "NEO6 96K MUSIC":
DTS NEO:6 surround MUSIC mode *3
0 "ARENA":
DSP surround ARENA mode *4
- "JAZZ CLUB":
DSP surround JAZZ CLUB mode *4
= "THEATER":
DSP surround THEATER mode *4
~ "STADIUM":
DSP surround STADIUM mode *4
! "DISCO":
DSP surround DISCO mode *4
@ "STEREO":*5
Normal stereo playback.
*1 Cannot be selected in Dolby Virtual Speaker and Dolby Headphone
modes.
*2 The sound field can be adjusted as desired using the PANORAMA,
DIMENSION and CENTER WIDTH modes. e
*3 The sound field can be adjusted as desired using the CENTER IMAGE
modes. r
*4 Cannot be selected in Dolby Virtual Speaker and Dolby Headphone
modes or with a 96 kHz linear PCM signal input.
The effect level of the DSP surround mode can be adjusted as
desired. w
*5 In Dolby Virtual Speaker and Dolby Headphone modes, the Dolby
Digital signal input cannot be listened to in the stereo mode.
Listen modes available with analog or PCM playback:
3
Adjust the volume.
Note
÷ Certain modes may be unavailable depending on the type of input
signal or speaker setting.
÷ If an optimum surround effect cannot be obtained or the desired
mode cannot be selected, check the speaker and input mode
settings. 8¢
Dolby Digital Surround EX compliant disc :
Dolby Digital Surround EX compliant disc contains identification signals.
When you choose FULL AUTO during "Input mode settings" (8), this
amplifier detects the identification signals and change the LISTEN mode to
the DOLBY DIGITAL EX (Dolby Digital Surround EX mode) automatically.
But sometimes we find some discs which are Dolby Digital Surround EX
compliant disc but it does not contain the identification signals. If you find the
notice like “Surround EX” on the label of disc or package, you can choose
DOLBY DIGITAL EX, then you can enjoy Dolby Digital Surround EX sound.
*5462/37-44/EN 04.4.13, 8:01 PM41