Filter
Top Products
33
EN
Listening to radio broadcasts
AUTO/MONOBAND
INPUT SELECTOR
Auto 7
Tune –
1
/ +
¡
Band
RCV Mode
TUNER
Multi %/fi
MULTI CONTROL %/fi
ENTER
Tuning (non-RDS) radio stations
8)8)
The receiver can store up to 40 stations in the memory and recall them by one-touch operation.Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations in the preset memory see "Using RDS (Radio Data System) (For Europe)". fi
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key (or the Band key) to select the desired
broadcast band.
Each press switches the band.
-- 8 )8 )
3
Use the AUTO/MONO key (or the Auto
7
key) to select the
desired tuning method.
Each press switches the tuning method to either auto or manual tuning.
1 Auto tuning:
The "AUTO" indicator lights up
2 Manual tuning:
The "AUTO" indicator goes off
÷
Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL
%
/
fi
(or Multi
%
/
fi
keys, Tune +/
- keys) to select the station.
Auto tuning:
The next station is tuned automatically.
Manual tuning:
Use the MULTI CONTROL % / fi (or Multi % / fi ) to select the
desired station.
Presetting radio stations
AUTO/MONOBAND
INPUT SELECTOR
MULTI CONTROL %/fi
ENTER
Collective presetting of stations
(For U.S.A., Canada and Australia)
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key (or the Band key) to select he broadcast
band to "FM".
3
Press and hold the ENTER for more than 2 seconds.
AU OT
PR TESE
The blinking "AUTO" display and blinking "PRESET" display
appear alternately.
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ Use the Manual Preset function if a desired FM station
cannot be preset using the Auto Preset function or when it
is required to preset AM stations.
Presetting radio stations manually
1
Tune to the station you want to store.
2
Press the ENTER while receiving the station.
)1 7 58 5
Proceed to step 3 within 5 seconds. (If more than 5 seconds
elapse, press the ENTER again).
3
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys) to
select one of the station presets (1 – 40).
4
Press the ENTER again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
"AUTO" indicator lights up in the display.
"TUNED" indicator is displayed when a
station is received."ST." indicator lights
when a broadcast is being received in
stereo.
7585
*5462/20-36/EN 04.4.13, 8:01 PM33