Filter
Top Products
1
C-V750 (En/T)
1
4
VOLUME CONTROL
DOWN
UP
TIMER
MODE
TIMER
SET
ON/STANDBY
1
V
ID
E
O
C
D
L
D
P
L
A
Y
E
R
LD
-K
300V
Timer operation
Two 24-hour timer systems (TIMER 1, TIMER 2) (which can
be used every day) and a sleep timer system (which works
only once) are available.
In each of TIMER 1 and TIMER 2, the timer data including the
operating period and played contents can be set and se-
lected to be activated or not as required.
Timer reservation is possible for the two types
TIMER 1 and TIMER 2 at the same time.
÷Please make reservations with an interval of at least one
minute, so that the operation times of TIMER 1 and TIMER 2
do not overlap.
Timer playback, timer recording (TIMER 1, TIMER 2)
With each of the two timer programs, a selected source can be
played (or radio broadcast can be recorded) in the previously set time
period.
Sleep timer
The unit is put to STANDBY mode automatically after the specified
period has elapsed.
W
Timer programming
Make preparations for the play (recording).
÷ To listen to radio ÷ To listen to CD ÷ To listen to tape ÷ For broadcast
recordings
÷ To listen to LD
The station should be
preset before timer pro-
gramming. •ª
Insert a disc.
(Program playback is not pos-
sible.)
Insert a tape. Make prepara-
tions for record-
ing. ∞
Insert a disc.
(Program playback is not pos-
sible.)
If tapes are inserted in both
decks A and B, playback starts
with the tape in deck B.
Set the (ON/STANDBY) switch to STANDBY.
Adjust the listening volume.
Select a TIMER No.
2 Press immediately after selection.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1
2 TIMER 2
3 TIMER 1,2
4 OFF
÷ The selected TIMER No. lights.
÷ If a previously programmed TIMER No. is selected, the contents will be
replaced by the new contents programmed.
÷ The timer programming operation is not possible when TIMER 1,2
have already been selected.
Main unit
Main unit
Main unit
TIMER
1
÷ The VOLUME CONTROL should be set to the desired volume while
the unit is ON.
3
2