Filter
Top Products
40
C-V750 (En/T)
Select the Dolby mode.
1
P
Setup Sound
Tone/
Balance
Speaker Level
Input Level
Test Tone DSP
Delay Time
-6dB
Sound
ENTER
Set Up
ENTER
ENTER
Speaker Level
MODE
M
U
Sound
STEREO
AC-3
PRO LOGIC
3 STEREO
PRO LOGIC
ENTER
ENTER
Setup Tone/Balance
Treble
Bass
-8dB
+8dB
L
||||||||||
+
||||||||||
R
7
Setup Speaker Level
-10dB
Surr.L
-5dB
Surr.R
+10dB
Center
-20dB
Sub W
Note
Note
Ambience effects
The setup for surround play can also be performed by
listening to actual music instead of the test tone.
Use the following procedure to adjust surround play while
listening to music.
÷Select the Dolby mode according to the played source and compo-
nent in use.
·
÷Play video software marked
DIGITAL
or .
Preparations
Setup for surround play
(while listening to music)
Display Dolby mode
PRO LOGIC :Dolby Pro Logic
3 STEREO :Dolby 3 Stereo
AC-3 :Dolby Digital (AC-3)
÷ Switching is not possible when the 6ch INPUT is used.
Select an icon.
(The displayed icons may be variable depending
on the model.)
Each press switches the adjustment items as shown below.
3 BASS :Tone, Bass
4 TREBLE :Tone, Treble
5 L- - - - - - -R :Balance
6 C ch :Center speaker
7 SR ch :Surround speaker, Right
8 SL ch :Surround speaker, Left
9 SW ch :Subwoofer
0 DELAY :Delay time
! INPUT :Input level
÷ With the GRC, the adjustment items shown in a single menu can be
adjusted at once. (The adjustment steps 3, 4 and 5 or steps 6, 7,
8 and 9 are provided in a single menu so they can be adjusted
successively without changing the menu screen.)
Adjust the adjustment item.
2
If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status
before the setup mode was entered.
The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
Main operation menu
(The displayed icons are variable depending
on the model.)
Main unit
GRC
Main unit
GRC
Main unit
GRC
Main unit
GRC
÷ Adjustment items 7, 8 and 0 are not required in the 3 STEREO mode.