Kenwood C-V750 Stereo Receiver User Manual


 
45
C-V750 (En/T)
Notes for surround play
Each press of the ENTER key switches the Center speaker size as shown
below.
1 C LARGE :Setup for large-sized center speaker
2 C OFF :Setup for not using the center speaker
3 C SMALL :Setup for small-sized center speaker
Each press of the MULTI. CONTROL LEVEL DOWN key switches the
Center speaker size.
ENTER
Center
Small
MULTI.CONTROL
LEVEL
MULTI.CONTROL
LEVEL
4
5
ENTER
MULTI.CONTROL
LEVEL
MULTI.CONTROL
LEVEL
Surr.
Small
To quit the setup operation:
MODE
M
U
ENTER
Confirm
Select the step “5” icon.
1 Select LARGE, SMALL or OFF.
(Select icons.)
2 Go to adjustment step “5”.
(Press the Down key)
(Press the Up key)
Set the center speaker size.“C”
÷ When “SW” is set to ON and “F” is set to SMALL, “C” and “S” can
be set only to SMALL or OFF.
Each press changes
the setup.
Select the step “2” icon.
1 Select LARGE, SMALL or OFF.
2 Go to adjustment step “2”.
Set the surround speaker size.“S”
÷ The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
When the surround speakers are set to OFF in the middle of Dolby Pro
Logic mode, this is automatically switched to the Dolby 3 STEREO
mode.
When the center speaker is set to OFF in the middle of 3 STEREO
mode, this is automatically switched to the normal STEREO mode.
Ambience effects
Main unit GRC
Main unit GRC
Main unit GRC
Main unit
GRC
Each press changes
the setup.
(Select icons.)
(Press the Down key)
(Press the Up key)
Each press of the ENTER key switches the Surround speakers size as
shown below.
1 S LARGE :Setup for large-sized surround speakers
2 S OFF :Setup for not using the surround speaker
3 S SMALL :Setup for small-sized surround speakers
Each press of the MULTI. CONTROL LEVEL DOWN key switches the
Surround speaker size.
÷ When “SW” is set to ON and “F” is set to SMALL, “C” and “S” can
be set only to SMALL or OFF.
Main unit
GRC