Filter
Top Products
36
C-V750 (En/T)
1
Select the Dolby mode.
ENTER
PRO LOGIC
ENTER
P
ENTER
MODE
M
U
Tone/
Balance
Sound
Set Up
ENTER
ENTER
L
||||||||||
+
||||||||||
R
7
MULTI.CONTROL
LEVEL
ENTER
Return
ENTER
Sound
STEREO
AC-3
PRO LOGIC
3 STEREO
Each press switches the adjusted items as shown below.
1 BASS :Tone, Bass
2 TREBLE :Tone, Treble
3 L- - - - - - -R :Balance
4 C ch :Center speaker
5 SR ch :Surround speaker, Right
6 SL ch :Surround speaker, Left
7 SW ch :Subwoofer
8 DELAY :Delay time
9 INPUT :Input level
Setup Sound
Tone/
Balance
Speaker Level
Input Level
Test Tone DSP
Delay Time
-6dB
2
The feeling of presence in the surround effects can be
improved by performing the following adjustment proce-
dure according to the speaker system and listening room
environment in use.
Once they are adjusted, re-adjustment is not necessary even
after the surround mode is switched to other modes.
Adjustment sequence
Balance
adjustment
Adjustment
with test tone
Delay time
adjustment
Setup for surround play
÷ Select the Dolby mode according to the played source and component
in use.
·
÷ The AC-3 mode can be used when the Dolby Digital signal is available.
÷ Switching is not possible when the 6ch INPUT is used.
Display Dolby mode
PRO LOGIC :Dolby Pro Logic
3 STEREO :Dolby 3 Stereo
AC-3 :Dolby Digital (AC-3)
Select an icon.
(The displayed icons may be variable
depending on the model.)
÷ Adjustment items 5, 6 and 8 are not required in the 3 STEREO mode.
÷ The adjusted items which can be selected with 6ch INPUT are 3, 4, 5,
6 and 7, in this sequence.
÷ Those which can be selected when SOURCE DIRECT is ON are 7 and 9.
Adjust the balance. “L- - - - - - -R”
1 Select the Balance adjustment display.
2 Adjust the levels of the front speakers
(Left, Right) so that they sound identical.
To decrease
right channel
level
To decrease
left channel
level
3 Quit the balance adjustment.
If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status before
the setup mode was entered.
The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
Ambience effects
Indicates the balance setting
Position of the right speaker
Indicates the center
Position of the
left speaker
Main operation menu
(The displayed icons are variable depending
on the model.)
Main unit
GRC
Main unit
GRC
Main unit
Main unit
GRC
To decrease right
channel level
To decrease left
channel level
L
-
--yt- -R