Filter
Top Products
14
C-V750 (En/T)
ON/STANDBY
MUTE
VOLUME
ENTER
Setup
DVD/6ch Input
Sound Speaker
C D
Sat.
Tape1
Cable
Reset
VCR1
VCR2
L D
T V
Confirm
Set Up
Return
Input
Source
Main Menu
TapeA
TapeB
Tape1
LD
Tuner
CD
VCR2
VCR1TVSat.Cable
Set Up
Set Up
Set Up
C D
Sin
g
le
Main Menu
Dual
L D
System Control
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Main Menu
Tape1
Setting up the GRC according to the option components
(Set Up)
The following procedures prepare the GRC for operating the
components connected through system control cords. Make
sure that these components are connected through system
control cords. 8
÷ If you proceed to the following “Set Up” operations immediately after steps 1 to 4 of “Model Type
Setup (GRC setup procedure)” on page #, start operation with step “3 Select the CD icon” in
the “Set Up CD” procedure.
Set Up CD Set Up Tape 1 Set Up LD
Main operation menu
(The displayed icons are variable depending
on the model.)
÷ Select “Single”, “Dual”, “Carrousel” or
“Changer” according to the connected
CD player type.
1 Select the ”Set Up“ icon.
2 Press the ”ENTER“ key to enter the
selection.
3 Select the ”CD“ icon.
4 Press the ”ENTER“ key to enter the
selection.
5 Select the ”Single“ icon.
6 Press the ”ENTER“ key to enter the
selection.
7 Select the ”Main Menu“ icon.
8 Press the ”ENTER“ key to enter the
selection.
÷ Select “Dual” or “Single” according to
the connected cassette deck type.
1 Select the ”Set Up“ icon.
2 Press the ”ENTER“ key to enter the
selection.
3 Select the ”Tape 1“ icon.
4 Press the ”ENTER“ key to enter the
selection.
5 Select the ”Dual“ icon.
6 Press the ”ENTER“ key to enter the
selection.
7 Select the ”Main Menu“ icon.
8 Press the ”ENTER“ key to enter the
selection.
÷ Select “System Control” or “IR” ac-
cording to the connected LD player type.
1 Select the ”Set Up“ icon.
2 Press the ”ENTER“ key to enter the
selection.
3 Select the ”LD“ icon.
4 Press the ”ENTER“ key to enter the
selection.
5 Select the ”System Control“ icon.
6 Press the ”ENTER“ key to enter the
selection.
÷ Icon
CD
appears at the moment the setup
has completed.
÷ Icons
TapeA
/
TapeB
or icon
Tape1
appear at the
moment the setup has completed.
÷ Icon
LD
appears at the moment the setup
has completed.
In the operations of the GRC (Graphical Remote
Control unit), proceed to each step within 10
seconds after the previous step.
The display disappears in 10 seconds.
Setup of GRC according to the
CD player in use
Setup of GRC according to the
cassette deck in use
Setup of GRC according to the
LD player in use
Setup of the Graphical Remote Control (GRC) unit
To resume GRC display, move the Joy-
stick key in any directions.