Filter
Top Products
38
C-V750 (En/T)
Lights for 5 sec.
Select the desired mode.
3
2
ENTER
ENTER
ENTER
DSP Mode
ENTER
ENTER
Cathedral
Sound DSP Mode
PRO LOGIC
STEREO
DSP
P
E
O
DSP
Sound
STEREO
AC-3
DSP Mode
PRO LOGIC
3 STEREO
Source
Direct
ENTER
STEREO
ENTER
Manufactured under license from Dolby Laboratories Licensing Corporation.
"Dolby","AC-3","Pro Logic"and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Copyright 1992 Dolby Laboratories,Inc. All rights reserved.
Sound
STEREO
AC-3
PRO LOGIC
3 STEREO
ENTER
Ambience effects
Dolby Digital (AC-3) can be used when playing DVD or LD software bearing the
DIGITAL
mark and Dolby Digital (AC-3) format digital broadcasts (etc.). Dolby Pro
Logic and Dolby 3 Stereo can be used when playing video, DVD, or LD software
bearing the
mark. DSP modes can be used with any source except
Dolby Digital.
Be sure to complete “Set up for surround play” before using any of these
surround modes. fl
Surround play
1
A To select a Dolby mode:
B To select the DSP mode:
Selection cursor
When a Dolby mode is selected:
1 Cursor position
2 Entry
Each press of the DSP key switches the sound fields as shown below.
1 ARENA :A lively feeling as felt in the frontmost seat in a
concert arena.
2 JAZZ CLUB :Sound field of a jazz live house where cymbals
sound sharply.
3 STADIUM :A free feeling with little reverberation reflected
from the ceiling.
4 CATHEDRAL :A sound field like in a church.
5 THEATER :A lively sound field like in a theater.
When the DSP mode is selected:
÷ Sound parameter adjustments in DSP mode
y
Play video software.
Adjust the sound level.
To end surround play
Goes off
Main operation menu
(The displayed icons are variable depending
on the model.)
Main unit
GRC
Main unit
GRC
Main unit
Main unit
GRC
AC-3
PRO LOGIC
3 STEREO
DSP
s
T
EREO
÷ Switching is not possible when the 6ch INPUT is used.
When the source is other than Dolby Digital (AC-3)
During playback of Dolby Digital (AC-3) compatible software
AC-3
sT
Display Dolby mode
PRO LOGIC :Dolby Pro Logic
3 STEREO :Dolby 3 Stereo
AC-3 :Dolby Digital (AC-3)
Sound may not be reproduced when the input signal and Dolby mode are
selected improperly.
How to select the digital input, analog input and Dolby mode. ·
÷ Select the Dolby mode according to the software to be played.
÷ This can be selected when the mode is other than Dolby Digital.