Filter
Top Products
34
English
Using the Remote Control
Press the REPEAT button.
The display changes with each press of the button, as shown below.
= ALL = 1 CD = 1 = OFF = (back to the beginning)
o “REPEAT ALL” and “REPEAT 1” remain on the display even when you change the CD play mode.
o The three Repeat Modes above can be selected during Continuous Play, however, during Program
Play and Random Play, you can only select REPEAT ALL or REPEAT 1.
To exit Repeat Mode, select “OFF” in step 3.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation. When the electronic lock is on, the trays cannot be opened even if the 0 or ALL CD EJECT
button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Electronic Lock ———————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the 7 button, press the DISC 1’s 0 button.
“LOCKED” appears on the display to let you know that the trays
have been locked.
When the CD Player trays are locked, pressing the 0 or ALL CD EJECT buttons displays the
message “LOCKED” on the display and the trays do not open. And the 0 or ALL CD EJECT button
can not be used to automatically turn on the power.
Unlocking the Electronic Lock ——————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the 7 button, press the DISC 1’s 0 button.
When the unlock operation is done, “UNLOCKED” appears
in the display to show that the lock has been taken off.
The trays can now be opened by pressing the 0 or ALL CD EJECT button.
The 0 and ALL CD EJECT buttons can also be used to automatically turn on the power.
DISC 1
REPEAT
CA-TD77R[EF]/EN/p26-52 97.7.24, 2:42 PM34