Filter
Top Products
31
English
5. Press the cursor key to the up or down
(¡ or 1) to select the disc.
The display changes to the Program Entry display
and the disc number and track number sections blink
for a few seconds.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the up (¡ ) cursor key
1 Ô 2 Ô 3
Press the down ( 1) cursor key =
• If you press the DISC (1-3) buttons instead of pressing the up or down (¡ or 1)
cursor key, you can select the disc.
• While the display is blinking, perform the operations in steps 6 to 7. When the blinking display
changes to the “PROGRAM” display, repeat the operations in steps 5 to 7.
6. Press the cursor key to the right
or left (4 or ¢) to select
the track.
The track number appears on the display.
7. Press the SET button.
The blinking disc number and track number changes
to a steady light, and the step number is displayed.
8. Repeat steps 5 to 7 to select the other tracks for the program.
• To select another track from the same disc, repeat the procedure from step 6.
9. Press the 3 or CD button.
The Unit plays the tracks in the order you have programmed them.
Using the Remote Control
1. Press the PLAY MODE button to
select PROGRAM.
“PROGRAM” lights up on the display.
The display changes with each press of the PLAY
MODE button as below.
= CONTINUE = PROGRAM = RANDOM = (back to the beginning)
2. Select a disc with the DISC (1-3) buttons.
The display changes to the Program Entry display
and the disc number and track number sections
blink for a few seconds.
• While the display is blinking, perform the
operations in step 3. When the blinking display
changes to the “PROGRAM” display, repeat
the operations in steps 2 to 3.
3. Press the number keys (1 to 10
and +10) to select the track to
program.
• Example: For track 5, press 5. For track 15,
press +10 then 5. For track 20, press +10 then 10.
For track 32, press +10 three times, then 2.
The blinking disc number and track number changes to a steady light, and the step number is dis-
played.
4. Repeat steps 2 to 3 to select the other tracks for the program.
5. Press the 3 or CD button.
The Unit plays the tracks in the order you have programmed them.
Track number
Disc number
Step number
TAPE
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
PLAY
MODE
TAPE
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
DISC 3
DISC 2
DISC 1
Track number
Disc number
Step number
TAPE
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
TAPE
4
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
TAPE
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
TAPE
4
CD P. MODE
PROGRAM
REPEAT
OFF
VOL
SET
CA-TD77R[EF]/EN/p26-52 97.7.24, 2:40 PM31