Filter
Top Products
23
English
3333
Changing the Display ———————————————————
You can see RDS information on the display.
To view RDS information on the display, press the DISPLAY MODE button. (When using the Remote
Control, press the RDS DISPLAY MODE button after pressing the RDS CONTROL button.)
Each time you press the button, the display changes to show the following information:
PS (Programme Service):
Station names will be displayed.
PTY (Programme Type):
Types of broadcast programmes will be displayed.
RT (Radio Text):
Text message sent by stations will be displayed.
Station Frequency:
Station frequencies.
o While RDS information is being received from a station, “WAIT PS”, “WAIT PTY”, or “WAIT RT”
may appear on the display.
Searching for Programmes by PTY codes ————————
One of the advantages of the RDS service is that you can locate a particular kind of programme by
specifying the PTY codes.
o The PTY Search function is applicable to preset stations only.
To search for a programme using the PTY codes, follow this procedure:
Using the Unit
1. Press the PTY SEARCH button.
“PTY” and “SELECT” appear alternately on the display.
Note: If no adjustments are made for 5 seconds in PTY Search mode, the display reverts to the
previous display. Perform the next step while “PTY” and “SELECT” are being displayed.
2. Press the cursor key to the left or right (4 or ¢) to select a
PTY.
The display changes with each press of the cursor keys as shown below:
+ Press the left (4 ) cursor key
Ô TRAFFIC Ô NEWS Ô INFO Ô POP M Ô ROCK M Ô M.O.R. M Ô
LIGHT M Ô CLASSICS Ô OTHER M Ô AFFAIRS Ô SPORT Ô EDUCATE
Ô DRAMA Ô CULTURE Ô SCIENCE Ô VARIED Ô
Press the right ( ¢) cursor key =
3. Press the PTY SEARCH button again.
While the search function is running, the selected programme type and “SEARCH” alternate on the
display. The preset number also change.
Using the Remote Control
1. Press the RDS CONTROL button.
2. Press the 3 PTY SEARCH button.
“PTY” and “SEARCH” appear alternately on the display.
Note: If no adjustments are made for 5 seconds in PTY Search mode, the display reverts to the
previous display. Perform the next step while “PTY” and “SELECT” are being displayed.
DISPLAY
MODE
RDS
CONTROL
R
D
S
D
I
S
P
L
A
Y
M
O
D
E
PTY
SEARCH
PTY
SEARCH
RDS
CONTROL
PTY SEARCH
CA-TD77R[EF]/EN/p1-25 97.7.24, 3:18 PM23